This page centralizes documentation relating to the module loading, integration, and quality control/assurance testing of the Inner System, part of ATLAS' Inner Tracker Pixels Phase II upgrade project.
| Table of Contents | ||
|---|---|---|
|
Module loading pages
Building 33: Module loading equipment
| Consumable components for mixing and dispensing SE4445A list of consumables required for mixing SE4445, storing it in syringes, and dispensing it with the Janome robot. The linked page includes the information required to place orders for each item. |
Mixing SE4445
Storing SE4445
Operating procedures
Glue dispensing equipment | Building 33 - Glue freezer monitoring setup Page describing the setup of the LabJack 7 + thermocouples,as well as monitoring softwareair dispenser, PC setup, network setup. | Building 33 - How to mix | , and Janome robot for glue dispensing. The page labels the equipment and describes how to operate it. |
Operating procedures
Mixing SE4445 cartridges for storage |
This page describes how to set up and mix SE4445 into smaller syringes for later use in the B33 cleanroom complex gowning area. |
Building 33 - |
Glue freezer monitoring setupPage describing |
the setup |
of the LabJack 7 + thermocouples, as well as monitoring software, PC |
setup, network setup. |
Programming concepts in Janome Points for the glue dispensing robot |
Page describing how to set up points programme,
what is the difference between Point Job, PTP, palette plus example with glue.
Loading documents & presentations
Copies of lab notes and documents as well as links to relevant presentationsWe can only predict so many eventualities: This page describes how to create your own custom Janome Points program file. It breaks down some key concepts (like Janome jargon "Point Job," "PTP," and "palette") as well as how to set up the Janome Points programme. |
Further documentation and resources
This list of Loading notes and presentations contains copies of lab notes and documents in addition to links for relevant presentations between August 2018 and February 2020.
Integration Pages
 | Building 33 - Operating the QC Test BoxProcedures for operating the CO2 Plant and test box equipment |
Readout and Q/C setups
| FELIX readoutFELIX readout system documentations, direct FELIX setups, and test configurations. |
|---|
| Cooling Unit for Module QCInformation on cooling unit for module QC |
|---|
| YARR ReadoutYARR test bench documentation |
|---|
| RCE ReadoutRCE test bench documentation |
|---|
Module PSU Specs: https://docs.google.com/spreadsheets/d/1__SXNmNmi92uIiTc3N6NaWk_F7qjPgREDWn6JAHsI6M/edit#gid=1364552063