This page centralizes documentation relating to the module loading, integration, and quality control/assurance testing of the Inner System, part of ATLAS' Inner Tracker Pixels Phase II upgrade project.
Module loading pages
Building 33: Module loading equipment
Mixing SE4445
Module loading procedures
 | Repeat purchases for gluingA list of equipment needed to mix SE4445 syringes and use in |
 | Building 33 - Glue freezer monitoring setupPage describing the setup of the LabJack 7 + thermocouples, as well as monitoring software, PC setup, network setup. |
 | Building 33 - How to mix SE4445 cartridges for storageThis page describes how to set up and mix SE4445 into smaller syringes for later use in the B33 cleanroom complex gowning area. |
 | Building 33 - Setting up the equipment for gluingPage describing how to setup the air dispenser, PC, and robot for gluing. |
 | Building 33 - Programming the glue robotPage describing how to set up points programme, |
 | Loading documents & presentationsCopies of lab notes and documents as well as links to relevant presentations |
Integration Pages
 | Building 33 - Operating the QC Test BoxProcedures for operating the CO2 Plant and test box equipment |
Quality Control & Assurance (QA/QC)
Thermal Test pages
 | Thermal TestDescription and details on thermal test procedures. |
Readout and Q/C setups
| FELIX readoutFELIX readout system documentations, direct FELIX setups, and test configurations. |
|---|
| Cooling Unit for Module QCInformation on cooling unit for module QC |
|---|
| YARR ReadoutYARR test bench documentation |
|---|
| RCE ReadoutRCE test bench documentation |
|---|
Module PSU Specs: https://docs.google.com/spreadsheets/d/1__SXNmNmi92uIiTc3N6NaWk_F7qjPgREDWn6JAHsI6M/edit#gid=1364552063