This page centralizes documentation relating to the module loading, integration, and quality control/assurance testing of the Inner System, part of ATLAS' Inner Tracker Pixels Phase II upgrade project.
| Table of Contents | ||
|---|---|---|
|
Loading pages
Building 33: Module loading equipment
Mixing SE4445
Module loading procedures
 | Repeat purchases for gluingA list of equipment needed to mix SE4445 syringes and use in |
Building 33 - Glue freezer monitoring setupPage describing the setup of the LabJack 7 + thermocouples, as well as monitoring software, PC setup, network setup. | |
Building 33 - How to mix SE4445 cartridges for storageThis page describes how to set up and mix SE4445 into |
...
smaller syringes for later use in the |
...
B33 cleanroom complex gowning area. | |
Building 33 - Setting up the equipment for gluingPage describing how to setup the air dispenser, PC, and robot for gluing. | |
Building 33 - Programming the glue robotPage describing how to set up points programme, | |
Loading documents & presentationsCopies of lab notes and documents as well as links to relevant presentations |
Integration Pages
 | Building 33 - Operating the QC Test BoxProcedures for operating the CO2 Plant and test box equipment |
Thermal Test pages
 | Thermal TestDescription and details on thermal test procedures. |
Readout and Q/C setups
| FELIX readoutFELIX readout system documentations, direct FELIX setups, and test configurations. |
|---|
| Cooling Unit for Module QCInformation on cooling unit for module QC |
|---|
| YARR ReadoutYARR test bench documentation |
|---|
| RCE ReadoutRCE test bench documentation |
|---|
Module PSU Specs: https://docs.google.com/spreadsheets/d/1__SXNmNmi92uIiTc3N6NaWk_F7qjPgREDWn6JAHsI6M/edit#gid=1364552063
This is a test label on this section