...
Beam Position Monitors sense the passage of the beam when it induces a signal in the pickup electrodes mounted in the beam waveguide. This induced signal is of low current but can be 10's of volts for several nanoseconds, in synch with the beam's arrival. This signal is put directly on to a high quality coax to the receiving electronics.
In addition to this readback pulse, the stripline BPM system generates a calibration pulse that is sent to the striplines to correct for signal gain variation and drift. This is performed between beam pulses.
LCLS Stripline BPM Processor Engineering Specification (DRAFT)
LCLS Cavity BPM CalibrationLCLS BPM Data Acquisition System WPPB40
...
LCLS BC1 rectangular BPM, beam left to right
LCLS
...
-II DOG1 BPM, beam left to right
LCLS-II undulator hall cavity BPM
...
LCLS-II cavity BPM electronics in Building 913
LCLS Cavity BPM Receivers Network Information
BPM AMC Card Testing Procedure
2-Slot Crate Procedure & Manual
LCLS II BPM-C04 Status List.xlsx
LCLS_CAVITY_BPM_PLL_BOARD - PC-290-201-15-C03
LCLS Cavity BPM Receivers Network Information
Trouble shooting guide for VME based BPMs
VME Test Stand Overview for BPMs
BPM Ironing
TPR MSGDLY
MORE TO FOLLOW
LCLS-II HE Installation Information Checklist
