This page provides instructions for logging in to the LCLS and FACET control system. These instructions assume that you are using a PC running Windows. Instructions for Mac Users click here or Linux Users click here.
For special instructions on how to bring up the LCLS Home screen on a CUD click here.
For first time users, click here for configuration information.
$ represents the command line prompt. Type the text to the right of the $ on the command line.
Make sure that xwin32 is installed and running. If it's running you will see a blue X logo in the tray at the bottom right corner of the Windows screen.
Launch SecureCRT or putty and connect to host mcclogin.slac.stanford.edu. If a Security Warning pops up, click Accept & Continue. Log in with your Unix username and password.
At the prompt on mcclogin, type
ssh physics@lcls-srv01
or
ssh lclsops@lcls-srv01
or
ssh acclegr@lcls-srv01
depending on which group account you were added to in Step 2 above. If you see a prompt for a password, something went wrong and you need to contrack Ken Brobeck.
Launch LCLS Home Screen. At the prompt, type:
lclshome
If you don't want to type "ssh <groupname>@lcls-srv01" and "lclshome" every time you connect to the control system, click here and follow the instructions for LCLSHOME Short-Cuts.
Make sure that xwin32 is installed and running. If it's running you will see a blue X logo in the tray at the bottom right corner of the Windows screen.
Launch SecureCRT or putty and connect to host mcclogin.slac.stanford.edu. If a Security Warning pops up, click Accept & Continue. Log in with your Unix username and password.
At the prompt on mcclogin, typessh fphysics@facet-srv01
orssh facclegr@lcls-srv01
depending on which group account you were added to in Step 2 above. If you see a prompt for a password, something went wrong and you need to contrack Ken Brobeck.
Launch FACET Home Screen. At the prompt, type:facethome
If you don't want to type "ssh <groupname>@facet-srv01" and "facethome" every time you connect to the control system, click here and follow the instructions for LCLSHOME Short-Cuts updating lcls items to facet.
Login to lcls-dev2 with
$ ssh -X -Y username@lcls-dev2.slac.stanford.edu
Find out what shell you are running by typing echo $SHELL. Your shell will be either tcsh or bash.
ex:
$ echo $SHELL /bin/bash
I am running bash.
If you are using tcsh, type this commend to enter the bash shell before proceeding:
$ bash
If you are using bash, type this command:
$ source /nfs/slac/g/lcls/build/epics/setup/epicsSetup.bash
And start up the lcls home screen by typing:
$ lclshome
If you cannot bring up the lclshome, from a SecureCRT window, double check the Xll forward has been set. See Step 4.1 above.
If you still cann't bring up lclshome, verify that you have X-Win32 running. You should see an X icon on the menu bar. If the X-Win32 icon isn't there, then start X-Win32 and try to bring up lclshome again.
