Starting the LCLS Home Screen from Linux

This page provides instructions for logging in to the LCLS control system on a computer running Linux. Instructions for Windows Users click here or Mac Users click here.

For special instructions on how to bring up the LCLS Home screen on a CUD click here.

For first time users, click here for configuration information.

Conventions

$ represents the command line prompt. Type the text to the right of the $ on the command line.

Starting the LCLS Home Screen

Login to lcls-prod02 with

$ ssh -X username@lcls-prod02.slac.stanford.edu

At the prompt on lcls-prod02, type

ssh physics@lcls-srv01

or

ssh lclsops@lcls-srv01

or

ssh acclegr@lcls-srv01

depending on which group account you were added to in Step 2 above. If you see a prompt for a password, something went wrong, and you
need to contact Ken Brobeck.

Development System

Login to lcls-dev2 with

$ ssh -X username@lcls-dev2.slac.stanford.edu

Find out what shell you are running by typing echo $SHELL. Your shell will be either tcsh or bash.
ex:

$ echo $SHELL
/bin/bash

I am running bash.

If you are using tcsh, type this commend to enter the bash shell before proceeding:

$ bash

If you are using bash, type this command:

$ source /nfs/slac/g/lcls/build/epics/setup/epicsSetup.bash

And start up the lcls home screen by typing:

$ lclshome