Content
Data
exp=cxif5315:run=147, 198 - dark
exp=cxif5315:run=162 - water sample
exp=cxif5315:run=169 - data sample
Detector: CxiDs2.0:Cspad.0
Calibration files
Use my local calibration store
[psana] calib-dir = /reg/neh/home1/dubrovin/LCLS/rel-mengning/calib
Dark files were obtained and deployed using Calibration Management Tool
exp=cxif5315:run=147 dark average, rms, and average difference between runs 147-198:
Difference of average dark images between runs 147-198 is small, 0.3 ADU, difference rms=0.6 ADU, this proves that CxiDs2.0:Cspad.0 is stable during 50 runs.
Image array averaging
1) Download configuration file psana-cxif5315-cspad-ds2-NDArrAverage.cfg
2) To get average/rms/max over 10000 events data of run 169 use command:
psana -c psana-cxif5315-cspad-ds2-NDArrAverage.cfg -n 1000 exp=cxif5315:run=169
This command produces files with arrays of size (32x185x388)
- cspad-ndarr-ave-cxif5315-r0169.dat
- cspad-ndarr-rms-cxif5315-r0169.dat
- cspad-ndarr-max-cxif5315-r0169.dat
2) To get average/rms/max over 1000 events (skipping 5000) data for water sample of run 162 use command:
psana -c psana-cxif5315-cspad-ds2-NDArrAverage.cfg -s 5000 -n 1000 exp=cxif5315:run=162
This command produces files with arrays of size (32x185x388)
- cspad-ndarr-ave-cxif5315-r0162.dat
- cspad-ndarr-rms-cxif5315-r0162.dat
- cspad-ndarr-max-cxif5315-r0162.dat
Geometry alignment
In accordance with CSPAD Alignment, use geometry file:
/reg/g/psdm/detector/alignment/cspad/calib-cxi-ds2-2015-01-20/calib/CsPad::CalibV1/CxiDs2.0:Cspad.0/geometry/1-end.data
and array with image from file: cspad-ndarr-ave-cxif5315-r0169.dat
Apparently, this geometry file had wrong indexes associated with quads (cable swap) that gives misaligned 2x1s in quads. This problem should be fixed in the file
/reg/g/psdm/detector/alignment/cspad/calib-cxi-ds2-2015-01-20/calib/CsPad::CalibV1/CxiDs2.0:Cspad.0/geometry/geo-cxif5315-r0169-swap-tuned.data
Tuning of geometry can be done with Detector alignment tool running command:
geo -i cspad-ndarr-ave-cxif5315-r0169.dat -g geo-cxif5315-r0169-swap-tuned.data
Thus obtained geo-cxif5315-r0169-swap-tuned.data gives image, radial, and spectral histograms for averaged array:
or see image array with maximal intensities by the command
geo -i cspad-ndarr-max-cxif5315-r0169.dat -g geo-cxif5315-r0169-swap-tuned.data
looks like: ,
and similar for water background from run 162:
ROI Masks
Using image array in cspad-ndarr-max-cxif5315-r0169.dat and geometry file geo-cxif5315-r0169-swap-tuned.data, one can generate masks using the Mask Editor embedded in Calibration Manager.
Run command calibman
, select tab ROI
etc.
References