Versions Compared

Old Version 15

changes.mady.by.user Pascual, Patrick James

Saved on

compared with

New Version Current

changes.mady.by.user Pascual, Patrick James

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

 

Anchor
Production PV Gateways
Production PV Gateways

Production PV Gateways

A list of the various LCLS, LCLS-II, FACET, and Test Facilities gateways managed by EED Systems Group.

NamePurpose PVs served Host
CAS port
Beacon Port
Beacon sent to Document/CommentUpgrade Status
LCLS
gwEbeamServe

Serving LCLS PVs (Ebeam) to Photon

Readonly

Write for selected PVs

lcls-daemon350805081

172.21.40.63

(Photon Gateway Subnet)

Design

Admin

Allow all

Deny OTRS:DMP1:695:.*

  •  Upgrade to 64-bit EPICS7  
gwEbeamServeWF

Serving LCLS PVs (Ebeam) to Photon

Readonly

Write for selected PVs

lcls-daemon350795081

172.21.40.63

(Photon Gateway Subnet)

Deny all

Allow OTRS:DMP1:695:.*

(dedicated to serve XTCAV OTRDMP camera image PV)

  •  Upgrade to 64-bit EPICS7 
gwLCLS4FACETServing LCLS PVs to FACETReadonlylcls-daemon1050705069

172.27.75.255

(FACETCA)

Design

Admin

  •  Upgrade to 64-bit EPICS7 
gwLCLS4LCLSIIServing LCLS PVs to LCLS-IIRead and Writelcls-daemon1050605069172.27.131.255 ( LCLS2IOC) and 172.27.11.255 (MCCSRV 
  •  Upgrade to 64-bit EPICS7 
gwLCLSPUBServing LCLS PVs to publicReadonlylcls-prod0150685069

134.79.151.255

(DMZ)

Admin

  •  Upgrade to 64-bit EPICS7 
gwLCLSARCH0Serving LCLS and LCLS-gwLCLSARCH0Serving LCLS and LCLS-II PVs to Archiver on DMZReadonlylcls-prod0150765069

134.79.151.255

(DMZ)

.* ALLOW (default)

Deny a list

refer gwLCLSARCH*.dat

 

 

  •  Upgrade to 64-bit EPICS7 
gwLCLSARCH1Serving LCLS and LCLS-II PVs to Archiver on DMZReadonlylcls-prod0150775069

134.79.151.255

(DMZ)

.* DENY

Allow portion in the list

refer gwLCLSARCH*.dat

  •  Upgrade to 64-bit EPICS7 
gwLCLSARCH2Serving LCLS and LCLS-II PVs to Archiver on DMZReadonlylcls-prod0150785069

134.79.151.255

(DMZ)

.* DENY

Allow portion in the list

refer gwLCLSARCH*.dat

  •  Upgrade to 64-bit EPICS7 
gwLCLSARCH3Serving LCLS and LCLS-II PVs to Archiver on DMZReadonlylcls-prod0150795069

134.79.151.255

(DMZ)

.* DENY

Allow portion in the list

refer gwLCLSARCH*.dat

  •  Upgrade to 64-bit EPICS7 
LCLS-II
gwLCLSII4LCLSServing LCLS-II PVs to LCLSRead and Writelcls2-daemon1050605069172.27.3.255 ( LCLSIOC) and 172.27.11.255 (MCCSRV) 
FACET
  •  Upgrade to 64-bit EPICS7 
FACET
gwFACET4LCLSServing FACET PVs to LCLSReadonlyfacet-daemon150705069

172.27.11.255

(LCLSCA)

Design

Admin

  •  Upgrade to 64-bit EPICS7
gwFACETPUBServing FACET PVs to publicReadonlylcls-prod0150635069

134.79.151.255

(DMZ)

 Design
  •  Upgrade to 64-bit EPICS7 
gwEXP2FACETServing Fedora based PCOEdge Camera PVs in B244 to FACET controls

Readonly

Write allowed from facet-srv20 to slac-dev-fed

lcls-prod0150625069

facet-srv*:

172.27.72.28 172.27.72.22 172.27.72.23

Not in use currently
  •  Upgrade to 64-bit EPICS7
gwFACETARCHServing FACET PVs to Archiver on DMZReadonlylcls-prod0150755069

134.79.151.255

(DMZ)

Allow all

 

  •  Upgrade to 64-bit EPICS7 
Test Facilities
gwACCTESTPUBServing Test Facilities PV to publicReadonlytestfac-daemon250485049

134.79.219.255

(LCLSDEV)

doc
  •  

...

  • Upgrade to 64-bit EPICS7
Cryo
gwCRYO4LCLSServing Cryo PVs to LCLSRead and Writecryo-daemon150615069172.27.43.255 172.27.11.255 134.79.151.21

.* ALLOW

.* ALLOW CANWRITE

  •  Upgrade to 64-bit EPICS7 

 

Anchor
LCLS Gateway Test Procedures
LCLS Gateway Test Procedures

LCLS Gateway Test Procedures

...

lcls-daemon3

gwEbeamServe

...

Test Procedures

lcls-daemon3

gwEbeamServe:

  1. Change /etc/init.d/st.gwEbeamServe on lcls-daemon3 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwEbeamServe64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon3]$ /etc/init.d/st.gwEbeamServe restart
  3. Verify that all LCLS PVs except for OTRS:DMP1:695:* PVs can be seen from Photon/PCDS subnet clients.

 

gwEbeamServeWF:

  1. Change /etc/init.d/st.gwEbeamServeWFgwEbeamServe on lcls-daemon3 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwEbeamServeWF64gwEbeamServe64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon3]$ /etc/init.d/st.gwEbeamServeWFgwEbeamServe restart
  3. Verify that only that all LCLSIOC subnet PVs except for OTRS:DMP1:695:* PVs can be seen from Photon/PCDS subnet clients.

lcls-daemon10

  1. Verify that the lclshome->Network (Global)->PV Gateway Diag->Ebeam Serve display is repopulated after the restart.
  2. Check /u1/lcls/tools/gateway/gwEbeamServe.log for errors.

 

gwEbeamServeWFgwLCLS4FACET:

  1. Change /etc/init.d/st.gwLCLS4FACETgwEbeamServeWF on lcls-daemon10 daemon3 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4FACET64gwEbeamServeWF64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon10daemon3]$ /etc/init.d/st.gwLCLS4FACETgwEbeamServeWF restart
  3. Verify that LCLS PVs can that only OTRS:DMP1:695:* PVs can be seen from FACETCA subnet clients.

 

  1. Photon/PCDS subnet clients.
  2. Verify that the lclshome->Network (Global)->PV Gateway Diag->Ebeam Serve WF display is repopulated after the restart.
  3. Check /u1/lcls/tools/gateway/gwEbeamServeWF.log for errors.

...

lcls-daemon10

gwLCLS4FACETgwLCLS4LCLSII:

  1. Change /etc/init.d/st.gwLCLS4LCLSIIgwLCLS4FACET on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64gwLCLS4FACET64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon10]$ /etc/init.d/st.gwLCLS4LCLSIIgwLCLS4FACET restart
  3. Verify that LCLS that LCLSIOC subnet PVs can be seen from LCLS2IOC FACETCA subnet clients.
  4. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS 4 FACET display is repopulated after the restart.

lcls-prod01

  1. Check /u1/lcls/tools/gateway/gwLCLS4FACET.log for errors.

 

gwLCLS4LCLSIIgwLCLSPUB:

  1. Change /etc/init.d/st.gwLCLSPUBgwLCLS4LCLSII on lcls-prod01 daemon10 to use CMDPATH=/afsusr/slac/glocal/lcls/tools/gateway/script/st.gwLCLSPUB64gwLCLS4LCLSII_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01daemon10]$ /etc/init.d/st.gwLCLSPUBgwLCLS4LCLSII restart
  3. Verify that LCLS production that LCLSIOC subnet PVs can be seen when running lclshome on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).

gwLCLSARCH0:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. from LCLS2IOC subnet clients.
  2. Check /u1/lcls/tools/gateway/gwLCLS4LCLSII.log for errors.

...

lcls-prod01

gwLCLSPUB:

  1. Change Change /etc/init.d/st.gwLCLSARCH0gwLCLSPUB on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH0_64gwLCLSPUB64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH0gwLCLSPUB restart
  3. Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:
    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH0.dat
...
# allow everthing, deny patterns
EVALUATION ORDER ALLOW, DENY
.* ALLOW
^[A-Za-z0-9]+:UND1:.*    DENY
^[A-Za-z0-9]+:LTU1:.*    DENY
^[A-Za-z0-9]+:LTU0:.*    DENY
^[A-Za-z0-9]+:DMP1:.*    DENY
^[A-Za-z0-9]+:IN20:.*    DENY
^[A-Za-z0-9]+:BSY0:.*    DENY
^[A-Za-z0-9]+:BSYA:.*    DENY
^[A-Za-z0-9]+:MCC0:.*    DENY
^[A-Za-z0-9]+:SYS0:.*    DENY
^[A-Za-z0-9]+:LR20:.*    DENY
^[A-Za-z0-9]+:NEH:.*     DENY
^[A-Za-z0-9]+:NEH1:.*    DENY
^[A-Za-z0-9]+:FEH:.*     DENY
^[A-Za-z0-9]+:FEH1:.*    DENY
^[A-Za-z0-9]+:FEE1:.*    DENY
^[A-Za-z0-9]+:SYS2:.*    DENY
^[A-Za-z0-9]+:CLTH:.*    DENY
^[A-Za-z0-9]+:GUNB:.*    DENY
^[A-Za-z0-9]+:LGUN:.*    DENY
^[A-Za-z0-9]+:ALH2:.*    DENY
^[A-Za-z0-9]+:ALH0:.*    DENY
^[A-Za-z0-9]+:ACR0:.*    DENY
^[A-Za-z0-9]+:GBL0:.*    DENY
^[A-Za-z0-9]+:R02:.*     DENY
^[A-Za-z0-9]+:XRT1:.*    DENY

gwLCLSARCH1:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. Change /etc/init.d/st.gwLCLSARCH1 on lcls-daemon10 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH1_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH1 restart

  3. Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH1.dat
...
# deny everything, allow the patterns 
# For every allow pattern here, we should have a deny pattern in gwLCLSARCH0.dat; otherwise we'll get duplicate PVs
EVALUATION ORDER DENY, ALLOW
.* DENY
^[A-Za-z0-9]+:UND1:.*    ALLOW
^[A-Za-z0-9]+:LTU1:.*    ALLOW
^[A-Za-z0-9]+:LTU0:.*    ALLOW
^[A-Za-z0-9]+:DMP1:.*    ALLOW
^[A-Za-z0-9]+:IN20:.*    ALLOW
^[A-Za-z0-9]+:BSY0:.*    ALLOW
^[A-Za-z0-9]+:BSYA:.*    ALLOW
GWLCLSARCH1:.*         ALLOW

gwLCLSARCH2:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. Change /etc/init.d/st.gwLCLSARCH2 on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH2_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH2 restart

  3. Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH2.dat
...
# deny everything, allow the patterns 
# For every allow pattern here, we should have a deny pattern in gwLCLSARCH0.dat; otherwise we'll get duplicate PVs
EVALUATION ORDER DENY, ALLOW
.* DENY
^[A-Za-z0-9]+:MCC0:.*    ALLOW
^[A-Za-z0-9]+:SYS0:.*    ALLOW
^[A-Za-z0-9]+:LR20:.*    ALLOW
^[A-Za-z0-9]+:NEH:.*     ALLOW
^[A-Za-z0-9]+:NEH1:.*    ALLOW
^[A-Za-z0-9]+:FEH:.*     ALLOW
^[A-Za-z0-9]+:FEH1:.*    ALLOW
^[A-Za-z0-9]+:FEE1:.*    ALLOW
^[A-Za-z0-9]+:ALH0:.*    ALLOW 
^[A-Za-z0-9]+:ACR0:.*    ALLOW 
^[A-Za-z0-9]+:GBL0:.*    ALLOW 
^[A-Za-z0-9]+:R02:.*     ALLOW 
^[A-Za-z0-9]+:XRT1:.*    ALLOW 
GWLCLSARCH2:.*         ALLOW

gwLCLSARCH3:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. that LCLS production PVs can be seen when running lclshome on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).
  2. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS PUB display is repopulated after the restart.
  3. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSPUB.log for errors.

 

gwLCLSARCH0:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. Change /etc/init.d/st.gwLCLSARCH0 on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH0_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH0 restart

  3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH0 display is repopulated after the restart.

  4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH0.log for errors.

 

gwLCLSARCH1:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. Change /etc/init.d/st.gwLCLSARCH1 on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH1_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH1 restart
  3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH1 display is repopulated after the restart.
  4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH1.log for errors.

     

gwLCLSARCH2:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. Change /etc/init.d/st.gwLCLSARCH2 on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH2_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH2 restart

  3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH2 display is repopulated after the restart.

  4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH2.log for errors.

 

gwLCLSARCH3:

Note
titleArchiver Gateways

Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly.

  1. Change /etc/init.d/st.gwLCLSARCH3 on lcls-daemon10 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH3_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH3 restart

  3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH3 display is repopulated after the restart.

  4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH3.log for errors.

     

  5. Change /etc/init.d/st.gwLCLSARCH3 on lcls-daemon10 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH3_64

  6. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH3 restart

  7. Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH3.dat ... # deny everything, allow the patterns # For every allow pattern here, we should have a deny pattern in gwLCLSARCH0.dat; otherwise we'll get duplicate PVs EVALUATION ORDER DENY, ALLOW .* DENY ^[A-Za-z0-9]+:SYS2:.* ALLOW ^[A-Za-z0-9]+:CLTH:.* ALLOW ^[A-Za-z0-9]+:GUNB:.* ALLOW ^[A-Za-z0-9]+:LGUN:.* ALLOW ^[A-Za-z0-9]+:ALH2:.* ALLOW GWLCLSARCH3:.* ALLOW

...

lcls2-daemon10

gwLCLSII4LCLS:

  1. Change /etc/init.d/st.gwLCLSII4LCLS on lcls2-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLSII4LCLS64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls2-daemon10]$ /etc/init.d/st.gwLCLSII4LCLS restart

  4. Restart gatewayVerify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH3.dat
...
# deny everything, allow the patterns 
# For every allow pattern here, we should have a deny pattern in gwLCLSARCH0.dat; otherwise we'll get duplicate PVs
EVALUATION ORDER DENY, ALLOW
.* DENY
^[A-Za-z0-9]+:SYS2:.*    ALLOW
^[A-Za-z0-9]+:CLTH:.*    ALLOW
^[A-Za-z0-9]+:GUNB:.*    ALLOW
^[A-Za-z0-9]+:LGUN:.*    ALLOW
^[A-Za-z0-9]+:ALH2:.*    ALLOW
GWLCLSARCH3:.*         ALLOW
    Midnight
    [laci@lcls2-daemon10]$ /etc/init.d/st.gwLCLSII4LCLS restart

  5. Verify that LCLS2IOC subnet PVs are readable and writable from LCLSIOC subnet clients.

  6. Check /u1/lcls/tools/gateway/gwLCLSII4LCLS.log for errors.

...

Anchor
FACET Gateway Test Procedures
FACET Gateway Test Procedures

FACET Gateway Test Procedures

facet-daemon1

gwFACET4LCLS:

  1. Change /etc/init.d/st.gwFACET4LCLS on facet-daemon1 to use CMDPATH=/usr/local/facet/tools/gateway/script/st.gwFACET4LCLS64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [flaci@facet-daemon1]$ /etc/init.d/st.gwFACET4LCLS restart
  3. Verify that FACETCA subnet PVs can be seen from LCLSIOC subnet clients.

...

lcls-prod01

gwFACETPUBgwFACET4LCLS:

  1. Change /etc/init.d/st.gwFACET4LCLSIIgwFACETPUB on facetlcls-daemon1 prod01 to use CMDPATH=/afs/usrslac/localg/lcls/tools/gateway/script/st.gwFACET4LCLSII_64gwFACETPUB64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon10prod01]$ /etc/init.d/st.gwLCLS4LCLSIIgwFACETPUB restart
  3. Verify that LCLS that FACETCA subnet PVs can be seen from LCLS2IOC subnet clientswhen running facethome on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).

 

gwFACETPUBgwEXP2FACET:

  1. Change /etc/init.d/st.gwLCLS4LCLSIIgwEXP2FACET on lcls-daemon10 prod01 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64gwEXP2FACET64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon10prod01]$ /etc/init.d/st.gwLCLS4LCLSII restartgwEXP2FACET restart
  3. Note
    titlegwEXP2FACET Note

    gwEXP2FACET not currently in use

    Verify that LCLS PVs can be seen from LCLS2IOC subnet clients

    .

 

gwEXP2FACETgwFACETARCH:

  1. Change /etc/init.d/st.gwLCLS4LCLSIIgwFACETARCH on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64gwFACETARCH64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon10]$ /etc/init.d/st.gwLCLS4LCLSII restart
  3. Verify that LCLS PVs can be seen from LCLS2IOC subnet clients.

 

gwFACETARCH:

  1. Change 
    prod01]$ /etc/init.d/st.
    gwLCLS4LCLSII on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64
    gwFACETARCH restart

  2. Verify that the following PV patterns are archived in the FACET Archiver according to the permissions belowRestart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon10prod01]$ /etc/init.d/st.gwLCLS4LCLSII restart
  3. Verify that LCLS PVs can be seen from LCLS2IOC subnet clients.

...

  1.  cat $TOOLS/gateway/config/gwFACETARCH.dat
...
# support the gateway internal statistics
# Serve all FACET PVs 
.*  ALLOW



...

 

Anchor
Test Facilities Gateway Test Procedures
Test Facilities Gateway Test Procedures

Test Facilities Gateway Test Procedures

testfac-daemon2

gwACCTESTPUB:

  1. Change /etc/init.d/st.gwLCLS4LCLSIIgwACCTESTPUB on lclstestfac-daemon10 daemon2 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lcls-daemon10]$ /etc/init.d/st.gwLCLS4LCLSII restart
    3. Verify that LCLS PVs can be seen from LCLS2IOC subnet clients.
  3. /afs/slac/g/acctest/tools/gateway/script/st.gwACCTESTPUB64

  4. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [acctf@testfac-daemon2]$ /etc/init.d/st.gwACCTESTPUB restart
  5. Verify that ACCTESTFAC subnet PVs can be seen when running xtahome on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).

 

...

Anchor
Cryo Gateway Test Procedures
Cryo Gateway Test Procedures

Cryo Gateway Test Procedures

cryo-daemon1

gwCRYO4LCLS:

  1. Change /etc/init.d/st.gwLCLS4LCLSIIgwCRYO4LCLS on lclscryo-daemon10 daemon1 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64gwCRYO4LCLS64

  2. Restart gateway:

    Code Block
    languagebash
    themeMidnight
    [laci@lclslaci@cryo-daemon10daemon1]$ /etc/init.d/st.gwLCLS4LCLSIIgwCRYO4LCLS restart
  3. Verify that LCLS that CRYOSRV subnet PVs can be seen from LCLSIOC and LCLS2IOC subnet clients.

 

...