Production PV Gateways

A list of the various LCLS, LCLS-II, FACET, and Test Facilities gateways managed by EED Systems Group.

LCLS Gateway Test Procedures

lcls-daemon3

gwEbeamServe:

1. Change /etc/init.d/st.gwEbeamServe on lcls-daemon3 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwEbeamServe64

2. Restart gateway:

   [laci@lcls-daemon3]$ /etc/init.d/st.gwEbeamServe restart

3. Verify that all LCLSIOC subnet PVs except for OTRS:DMP1:695:* PVs can be seen from Photon/PCDS subnet clients.
4. Verify that the lclshome->Network (Global)->PV Gateway Diag->Ebeam Serve display is repopulated after the restart.
5. Check /u1/lcls/tools/gateway/gwEbeamServe.log for errors.

gwEbeamServeWF:

1. Change /etc/init.d/st.gwEbeamServeWF on lcls-daemon3 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwEbeamServeWF64

2. Restart gateway:

   [laci@lcls-daemon3]$ /etc/init.d/st.gwEbeamServeWF restart

3. Verify that only OTRS:DMP1:695:* PVs can be seen from Photon/PCDS subnet clients.
4. Verify that the lclshome->Network (Global)->PV Gateway Diag->Ebeam Serve WF display is repopulated after the restart.
5. Check /u1/lcls/tools/gateway/gwEbeamServeWF.log for errors.
   
   

lcls-daemon10

gwLCLS4FACET:

1. Change /etc/init.d/st.gwLCLS4FACET on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4FACET64

2. Restart gateway:

   [laci@lcls-daemon10]$ /etc/init.d/st.gwLCLS4FACET restart

3. Verify that LCLSIOC subnet PVs can be seen from FACETCA subnet clients.
4. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS 4 FACET display is repopulated after the restart.
5. Check /u1/lcls/tools/gateway/gwLCLS4FACET.log for errors.

gwLCLS4LCLSII:

1. Change /etc/init.d/st.gwLCLS4LCLSII on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64

2. Restart gateway:

   [laci@lcls-daemon10]$ /etc/init.d/st.gwLCLS4LCLSII restart

3. Verify that LCLSIOC subnet PVs can be seen from LCLS2IOC subnet clients.
4. Check /u1/lcls/tools/gateway/gwLCLS4LCLSII.log for errors.
   
   

lcls-prod01

gwLCLSPUB:

1. Change /etc/init.d/st.gwLCLSPUB on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSPUB64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSPUB restart

3. Verify that LCLS production PVs can be seen when running lclshome on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).
4. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS PUB display is repopulated after the restart.
5. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSPUB.log for errors.

gwLCLSARCH0:

1. Change /etc/init.d/st.gwLCLSARCH0 on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH0_64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH0 restart

3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH0 display is repopulated after the restart.

4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH0.log for errors.

gwLCLSARCH1:

1. Change /etc/init.d/st.gwLCLSARCH1 on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH1_64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH1 restart

3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH1 display is repopulated after the restart.
4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH1.log for errors.
   

    

gwLCLSARCH2:

1. Change /etc/init.d/st.gwLCLSARCH2 on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH2_64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH2 restart

3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH2 display is repopulated after the restart.

4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH2.log for errors.

gwLCLSARCH3:

1. Change /etc/init.d/st.gwLCLSARCH3 on lcls-daemon10 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH3_64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH3 restart

3. Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH3 display is repopulated after the restart.

4. Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH3.log for errors.

    

lcls2-daemon10

gwLCLSII4LCLS:

1. Change /etc/init.d/st.gwLCLSII4LCLS on lcls2-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLSII4LCLS64

2. Restart gateway:

   [laci@lcls2-daemon10]$ /etc/init.d/st.gwLCLSII4LCLS restart

3. Verify that LCLS2IOC subnet PVs are readable and writable from LCLSIOC subnet clients.

4. Check /u1/lcls/tools/gateway/gwLCLSII4LCLS.log for errors.
   
   

FACET Gateway Test Procedures

facet-daemon1

gwFACET4LCLS:

1. Change /etc/init.d/st.gwFACET4LCLS on facet-daemon1 to use CMDPATH=/usr/local/facet/tools/gateway/script/st.gwFACET4LCLS64

2. Restart gateway:

   [flaci@facet-daemon1]$ /etc/init.d/st.gwFACET4LCLS restart

3. Verify that FACETCA subnet PVs can be seen from LCLSIOC subnet clients.
   
   

lcls-prod01

gwFACETPUB:

1. Change /etc/init.d/st.gwFACETPUB on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwFACETPUB64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwFACETPUB restart

3. Verify that FACETCA subnet PVs can be seen when running facethome on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).

gwEXP2FACET:

1. Change /etc/init.d/st.gwEXP2FACET on lcls-prod01 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwEXP2FACET64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwEXP2FACET restart

3. gwEXP2FACET Note

   gwEXP2FACET not currently in use.

gwFACETARCH:

1. Change /etc/init.d/st.gwFACETARCH on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwFACETARCH64

2. Restart gateway:

   [laci@lcls-prod01]$ /etc/init.d/st.gwFACETARCH restart

3. Verify that the following PV patterns are archived in the FACET Archiver according to the permissions below:

   [laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwFACETARCH.dat
   ...
   # support the gateway internal statistics
   # Serve all FACET PVs 
   .*  ALLOW

   
   
   

Test Facilities Gateway Test Procedures

testfac-daemon2

gwACCTESTPUB:

1. Change /etc/init.d/st.gwACCTESTPUB on testfac-daemon2 to use CMDPATH=/afs/slac/g/acctest/tools/gateway/script/st.gwACCTESTPUB64

2. Restart gateway:

   [acctf@testfac-daemon2]$ /etc/init.d/st.gwACCTESTPUB restart

3. Verify that ACCTESTFAC subnet PVs can be seen when running xtahome on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).

Cryo Gateway Test Procedures

cryo-daemon1

gwCRYO4LCLS:

1. Change /etc/init.d/st.gwCRYO4LCLS on cryo-daemon1 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwCRYO4LCLS64

2. Restart gateway:

   [laci@cryo-daemon1]$ /etc/init.d/st.gwCRYO4LCLS restart

3. Verify that CRYOSRV subnet PVs can be seen from LCLSIOC and LCLS2IOC subnet clients.

• Page:
  Testing PV Gateways
• Page:
  Testing EPICS Extensions