...
- The geometry of the PS setup actually used is described very well by Stefan here
- Other setups are in progress.
- The requirements come from the following list:
Photon runs
------------
2 cerenkov
1 large plastic (1cm thick) for rate monitoring
2 finger counters (2mm thickness, overlap of 1x1cm) for triggering
1 large plastic (1cm thick) with a 24mm diameter hole centered on the
beam for vetoing background
2 XY silicon layers before the magnet
1 magnet
2 XY silicon layers after the magnet
1 plastic (1cm thick) after the last silicon for triggering
comment: we might deplete the 2nd cerenkov to reduce X0 if we realize
that the photon trigger is efficient
...