Contents:
Shelves
ID Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 EEPROM Date Notes Shasta Freel COB 2-1 2012-06-04 Olancha Keynot ? ? Whitney 14 slots
COBs
ID Site 0 Site 1 Site 2 Site 3 Site 4 Date Notes 2-1 2012-06-05 Back from JLAB 5/25/12 – switch broken 6/5/12 2-2 DTM 2-7 (445F63) DPM 2-7 (19D013) 2012-06-05 Back from JLAB 5/25/12 2-3 DTM 2-8 (44555C) DPM 2-10 (19DC05) 2012-06-05 3-1 DTM 2-6 (445D84) DPM 2-6 (19C145) 2012-05-03 Freel slot 5; DTM 2-2, DPM 2-2; Blue LED doesn't light 3-2 2012-05-03 Keynot slot 5; DTM 2-4, DPMs 2-7 3-4 DTM 2-2 (44810B) DPM 2-12 (198C40) 2012-06-05 3-5 DTM 2-4 (445FC5) DPM 2-1 (197519) 2012-06-05 "No devices detected on the JTAG chain (6/4)" Fine (6/5)
DTMs
ID MAC Firmware EEPROM System 0 System 1 Date Notes 1-2 Bad. DO NOT USE. 2-1 868 0.8.0 prod 2.2, 8?? rescue 2.2, 8xx 2012-05-02 2-2 868 0.8.0 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-3 2-4 868 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-5 868 0.8.0 prod 2.2, 927M rescue 2.2, 927M 2012-05-02 EEPROM Read errors; Disrupts JTAG to the DPMs 2-6 868 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2-7 868 2-8 868 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31
08:00:56:00:41:38
08:00:56:00:41:32
08:00:56:00:41:XX
08:00:56:00:41:34
08:00:56:00:41:XX
08:00:56:00:41:36
08:00:56:00:43:06
08:00:56:00:41:38
DPM 405s
ID Ser. No. MAC Firmware EEPROM System 0 System 1 Date Notes 2-1 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-2 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-3 000000197DAD 917 0.8.0 2012-05-03 Fails: peb 0 exception 0x8baec1 edw 0x5f transferred 0; EEPROM Read errors. XMD gives: C103 scraped off. 2-4 00000019B108 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 Programming f/w took two attempts; XMD 'dow'ing devel and 'con'ing causes crash to 0x700. XMD gives: C76 and R22 scraped off. 2-5 917 0.8.0 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-6 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-7 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-8 000000196E67 Bad. XMD gives: 2-9 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-10 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-11 000000197D2F Mark says board is bad. XMD gives: 2-12 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK
08:00:56:00:42:fc
08:00:56:00:42:f7
08:00:56:00:42:f9
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:XX
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:f5
08:00:56:00:42:fa
08:00:56:00:42:f8
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:f4
08:00:56:00:42:fb
08:00:56:00:42:XX
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:f6
DPM 440s
ID Ser. no. MAC Firmware MemTest EEPROM System 0 System 1 Date Notes 04 000000457E18 08:00:56:00:43:01 DpmTest_DB000018 Passed 2012-05-29 06 08:00:56:00:43:XX DpmTest_DB000018 Passed 2012-05-29 07 00000045403A 08:00:56:00:43:00 DpmTest_DB000018 Passed 2012-05-29 09 08:00:56:00:43:XX DpmTest_DB000018 Not loadable 2012-05-30 impact works, xmd doesn't 12 000000455233 08:00:56:00:43:02 DpmTest_DB000018 Passed 2012-05-30 14 000000456FB5 08:00:56:00:43:03 DpmTest_DB000018 Passed 2012-05-30
RTMs
ID EEPROM Date Notes 2-1 2012-05-xx 2-2 2012-05-xx