The missing connection on the power planes have been identified by Scott and implemented in the C01 design files. A new board spin is required.
Flex cable too thick
Medium
Dionisio/Tung
Need to change the fab notes to make board more flexible. If needed we will change the planes from solid to criss-cross pattern
Carrier board copper plate opening is too narrow
Medium
Marco
Done
Done
Marco has changed the design file to increase the opening and requested the tech to rework all existing copper carriers
Component heights to not match pockets in the cooling block
Medium
Marco
Scott found some components hight did not match the needs. Marco is working with Don to get this fixed
Mounting holes on cooling block have wrong size
High
Marco
Mounting hole on the cooling block are larger than in the board. This prevents us from securing the boards.
Mounting holes on cooling block have wrong size
Medium
Dawood
Initialization files only work if the project (python ./devGui.py) is executed in the script folder. How can we make it more consistent and enable the project to be ran from other locations
Configuration files
Medium
Dionisio
We need to enable the configuration files to be done for all asics individually