Names are broken down into the standard parts, DeviceType : Area : Position : Instance (Where needed) : Attribute.
RTD sensors placed on a device, will take the device name specified in the MAD deck.
| ACCL | Used for everything in the RF system that is part of the general physics and operations interface at the cavity level. Also used for penetration |
| GUN | Used for everything in the gun |
| COLL | Used for Collimators |
| WIRE | Used for Fast wire scanners |
| TORO | Used for ICT |
| FARC | Used for Faraday Cup |
| ROOM | Used for Air sensors in tunnel/building |
| LLRF | Used for phase reference line |
| WATR | Water system |
See https://slacspace.slac.stanford.edu/sites/lcls/lcls-2/wd/dsg/Forms/AllItems.aspx, Naming Convention section 6.1.2.2
All AREA field are taken from the document.
