You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Toroid Electronics Meeting Minutes

June 12, 2006

Electronics/Triggering Discussion

^

Contents

Unknown macro: {maketoc}

^

Attendees:

John Dusatko

Mike Browne

Stephen Norum

Michael Cecere

Agenda:

  1. Analog Electronics
  2. Trigger Generation

Presentation Materials:

Analog Electronics and Triggering, M. Cecere (PPT Format)

Minutes:

  1. Discussed Analog Electronics Design
    1. Is the new toroid polarity being specified? will look into with Tim and Steve
    2. Need to be careful about headroom (top and bottom) in single supply signal chain
    3. Use NPO ceramic caps for integration, S/H
    4. Configuration, can use a DB header, or even jumpers on the main board itself
  1. Discussed Triggering requirements and generation
    1. John will handle timing CPLD. Yeah!
  1. Ron's PAD board will work,
    1. he can make extras easy, we need two + spare
    2. his software has a diagnostic mode where the whole waveform is transferred
  1. i generated various documents for PDR and other purposes,
    1. in my v: drive users directory

Action Items:

  1. M. Cecere: Adjust circuit as described above
  2. M. Cecere: Develop Trigger Generation Scheme with John
  3. M. Cecere: Need ICD and Test Plan
  4. M. Cecere: Determine handshaking scheme for IOC and MPS
  5. M. Cecere: Add Mechnical Box design to timeline
  6. M. Cecere: Add fast digitizer coding, and coder, to timeline
  • No labels