You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 46
Next »
Toroid Electronics Meeting Minutes
August 23, 2006
Analog Electronics Design
^
Contents
Unknown macro: {maketoc}
^
Attendees:
John Dusatko |
Bob Simmmons |
Michael Cecere |
Steve Smith |
Tim Montagne |
|
Agenda:
- Schematics ready for layout
- Next up: software development, CPLD code, hardware.
Presentation Materials:
PPT for meeting, August 23, 2006, M. Cecere
Schematics, Netlist, and BOM for BCM:
BCM Schematics, PDF, Aug 23, M. Cecere
BCM Schematics BOM, EXCEL, Aug 23, M. Cecere
BCM Schematics Netlist, PADSPCB, Aug 23, M. Cecere
Minutes:
- Circuit Discussion
- Add header for access to Voffset cancellation circuitry
- Slow down op-amps affter Integrator? maybe after board made
- remove termination of EVR into CPLD, add some series resistance.
- same for 119MHz into CPLD
- check with Evgeny on EEIP issues for box layout
- consider adding pi filter network between AC/DC PS and PCB
- check PS current requirements
- drawing numbers on front of box...
- Toroid Manufacture Update (Tim Montagne)
- 3 braze failures so far
- will try new process, fire ceramic with no metal to create eutectic braze alloy
- expect to come out of furnace next monday
- will due pull-test to check durability, coat
- if fails, assemble for a electrical/mechanical test and deliver to CPE
- step back and do traditional metallization process
Action Items:
- M. Cecere: Adjust circuit as described above and put on v: drive, pdf's
- M. Cecere: Deliver netlist to Tung
- M. Cecere: See Jennifer about parts procurement
- M. Cecere: Start Software Development!
- M. Cecere: Continue overseeing box and cable designs