You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Next »

TODO: General introduction to the project

1M

 

 

4M

 

16M

 


Table of contents

Useful resources


Design 

Mechanical design

TODO:

  • List of drawings and links to team center

Electronics design

ePixUHR-miniTileBD

Concept boards


Readout BoardASIC Carrier Board
3D view



Name

ePixHR35kfps-readout-board-concept

ePixHR35kfps-ASIC-carrier-board-concept
Altium 365 project

https://stanford-linear-accelerator-center.365.altium.com/designs/8A58F5D8-B190-4E81-9967-A7C97BA5BAD8

https://stanford-linear-accelerator-center.365.altium.com/designs/1C32F53F-0F7D-4FA6-A6A2-A68D0AD370D8
Dimensions (X x Y)55 mm x 130 mm

TODO

  •     List of project files and links to altium
  •     Trade study complete material (shared with gt readout)

ASIC

The ePixUHR 35 kHz ASIC is used in this project.

Resources:

Size and measurements

These measurements are taken from a GDS file (ePixUHR_35kHz_APonly.gds) that was opened in KLayout.


Full matrixLower left cornerLower right corner
Image

Measurements
  • Width (x): 19334 µm
  • Height (y): 18373.95 µm
    • 18273.95 µm + 100 µm (note from ASIC group)
  • Pad
    • Width (x): 60 µm
    • Height (y): 120 µm
    • Pitch: 100 µm
  • First pad location relative to lower-left corner
    • x: 186.985 µm
    • y: 58.09 µm
  • Last pad location relative to lower-right corner
    • x: 187.015 µm
    • y: 58.09 µm

Altium footprint



Meeting notes

  • No labels