You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
Need to install
Download Testing Script from Github: https://github.com/slaclab/bpm-python-scripts
Test Procedures:
- Establish connection to the network analyzer from PC with USB cable
- Connect 2 foot RF cables to Port 1 and Port 2 of the Network Analyzer
- Go to the directory of the python test scripts, and type the following commands:
- ../bpm_python_scripts/Mechanical_Testing/
- python3 main.py
- A command-line program will show up
- Enter BPM PCMM diameter number, job number, serial number, and run number according to prompt.
- When prompted, always make sure to run calibration (2) before the first test is performed.
- To do Calibration, you will need:
- 2 precision network analyzer calibration pods
- 1 barrel
- 2 RF cables
- After calibration is done, enter full-test(1), and perform the PCMM test according to the script procedures shown in the command line.
- When prompted, save the results, and the PCMM results will be saved in the plots folder