Making note of which MPOD channels correspond to which detector (ePix10k small/Quad/2M, ePix100, others).
ePix10ka small OR ePix100
Channel (cable s0) | Channel (cable s0) | Voltage | Current | |
---|---|---|---|---|
AVDD | 200 | 202 | 6 | |
DVDD | 201 | 203 | 6 | |
HV | 4 | 5 | 200 | |
PVDD | 204 | 205 | *3.5 |
*Might vary based on temperature sensor reading. Typically ranges from 2-4 V (as long as temperature stays between 3-10 C).
ePix10k2M
Table entries correspond to Q0/1/2/3
Channel | Voltage | Current | |
---|---|---|---|
**AVDD | 101/103/105/107 | 6 all) | ~ 1.5 |
DVDD | 100/102/104/106 | 6 (all) | ~ 4.3 |
HV | 0/1/2/3 | 200 |
** Turn all AVDD on first, wait 5-10 seconds, then turn DVDD on. (Idk why, Kaz said so. Something about ensuring 2M configures properly)