Making note of which MPOD channels correspond to which detector (ePix10k small/Quad/2M, ePix100, others) and what the operating voltages are.
ePix10ka small OR ePix100
| Channel (cable s0) | Channel (cable s0) | Voltage | Current | |
|---|---|---|---|---|
| AVDD | 200 | 202 | 6 | |
| DVDD | 201 | 203 | 6 | |
| HV | 4 | 5 | 200 | |
| PVDD | 204 | 205 | *3.5 |
*Might vary based on temperature sensor reading. Typically ranges from 2-4 V (as long as temperature stays between 3-10 C).
ePix10k2M
Table entries correspond to Q0/1/2/3
| Channel | Voltage | Current | |
|---|---|---|---|
| **AVDD | 101/103/105/107 | 6 all) | ~ 1.5 |
| DVDD | 100/102/104/106 | 6 (all) | ~ 4.3 |
| HV | 0/1/2/3 | 200 |
** Turn all AVDD on first, wait 5-10 seconds, then turn DVDD on. (Kaz said it ensure 2M configures properly?)