You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

YARR DAQ "FELIX" Workstation with 1 Spec PCIe card in Lab C



Introduction


This is a YARR DAQ test bench for electrical/DAQ testing & YARR GUI development.

It was set-up using an old "FELIX" workstation from Matthias' office  (Zijun & Sanha, April 21st, 2021). It is currently set up to run a RD53A module—the one Zijun has worked on previously.

The PC is accessible via machine name felix2  from rddev111.

Overview


Individual Components

DevicePhotos
PC

"FELIX" Workstation (taken from Matthias' office)

DAQ Card

YARR DAQ (Trenz TEF 1001-02) card & Ohio State Adapter card connected to the PC

In: PCIe 3.0 / Out: Mini-Displayport

The card is connected to the CPU SLOT6 PCI-E 3.0 X16  slot of the PC

RD53A Module

RD53A module is connected to the DAQ system for testing & GUI development purposes.

(Note that this is the module that Zijun has worked on previously, and there are some non-trivial caveats regarding its data transmission.)

Power Supply

BK Precision 1787A DC Power Supply

Nominal Setting for RD53A:
Constant Voltage (C.V.) mode
Output Voltage 1.8V
Output Current 1.5A (max.)

Raspberry Pi

(Control System)

Raspberry Pi is used for the online monitoring camera and the power supply control.

The power supply is controlled by `channel 1` of the relay switch module.





  • No labels