Content
Content
To-do
2016-03-24
Requests
Detector
- Chris & Zhou - add default geometry for Epix100a
- Chris - revision of doc-string in AreaDetector
- Jason - retrieve size and shape from configStore
- Chuck - add method converting image to n-d array
Calibman
- Phil - change behavior of the Deploy buttun (turn to Deployed)
Cross check for optical metrology
- Generate geometry for comparison
2016-02-11
- pyimgalgos PSAS-178 H-project as a 1-st candidate to sci-beam
- improve HBins - add edgemode parameter
- add RadialBkgd - low frequency background subtraction
- develop uni-tests for HBins
- calibman PSAS-6
- do not start on hosts where data is not seen
- do not start under opr accounts
- use switch between :xtc and :smd mode of the event reader
- improve py-algorithm for ndarray averaging, command
det_ndarr_raw_proc
- command line for
event_keys
clean-up code, get rid of Frame
- replace psana module-based averaging with Detector-based averaging
- develop deployment pop-up GUI
- Meng's FDE
- keep going with re-vision and cross-checks
- move new transformation to FiberAngles
- generate peak table in crystfel(?) format
- Detector Calibration Store, PSAS-148
- project description
- discussion with involved parties
- begin implementation
- chris-peakfinder:
- perhaps give a simple interface with fewer parameters to one of the peak finders?
- consistent names for both phases of peak-finding (radius, r0)?
PSANA
in ImgAlgos/ImgSaveInFile save image in other formats: bin, tiff, etc...
pdscalibdata::NDArrIOV1 - I/O ndarray of any shape.
Detector PSAS-139
- add method for export numpy array in text form
- add method to load calibration text file similar to NDArrIO
- load variable size calibration
- add method center()
Andor3d - support for variable size data in calibman and Detector
2014-06-27 Generic geometry parametrization
CalibManager.OpticAlignmentCspadV1.py
- generates constants type "geometry"
for CSPAD
pyimgalgos.GeometryObject.py, GeometryAccess.py
- works with calibration constants type "geometry"
C++ version of GeometryObject, GeometryAccess
cspad_image_producer.py
- use default calibration directory
PSCalib.CalibFileFinder.py - analog of C++ PSCalib::CalibFileFinder
generic image producer based on type "geometry"
GUI-based tool for sensors' alignment using type "geometry"
CalibManager/app/calibrun
- add option to use configuration parameters from file
CorAna
find the reason of the difference with Marcin's results
2013-06-05 Marcin apply LLD threshold = 200, in stead of 20.
fits to g2 function vs time
plot for fit parameters vs q
use processing for any camera