UPass-4

This is the our first "unblinded" pass, in that it uses all raw EVIO files instead of only every tenth one.

It is the same reconstruction software as Pass-4, but only reconstructs pair0/single0/pulser triggers.  If the TI bank does not contain one of those bits, the event is rejected before any reconstruction is done.

Automatic outputs going only to tape:  /mss/hallb/hps/engrun2015/upass4

All of 0.5 mm data (17K EVIO files) was run on the batch farm in about 5 days (in competition with pass4) with a failure rate of 5% (due to timeouts, limit was set at 4 hours).