L1-3 QA

HM #	run #	date	bias	temp (baseline run, #1)	notes on setup	results	notes on results
2	1	5/28/14 6:57 p.m.	200 V	room T (23.2)		plots	low noise 11, 33
2	2	5/29/14 10:31 a.m.	200 V	room T (30.5)		plots	low noise 11, 33
2	3					plots
11	1	5/19/14 7:30 p.m.	200 V	room T (26.4)	bad clock delay	plots	low noise 183, high noise 0, 638
11	2	5/19/14 8:08 p.m.	200 V	cooling down (5.2)		plots	low noise 183, high noise 0, 638
11	3	5/19/14 8:26 p.m.	200 V	cooling down (2.1)		plots	low noise 183, high noise 0, 638
11	4	5/20/14 11:47 a.m.	200 V	room T (27.7)		plots	low noise 183, high noise 0, 638
11	5	5/20/14 4:29 p.m.	200 V	room T (25.3)	R81 reworked	plots	low noise 183
11	6	5/20/14 5:27 p.m.	200 V	cold (-0.4)		plots	low noise 183
11	7	5/20/14 5:58 p.m.	200 V	cold (-0.4)	removed wire between grounds	plots	low noise 183
11	8	5/28/14 6:28 p.m.	200 V	cold (-0.2)		plots	low noise 183
11	9					plots
16	1	5/29/14 11:54 a.m.	200 V	room T (24.0)		plots	OK
16	2					plots
18	1	5/29/14 12:03 p.m.	200 V	room T (23.2)		plots	OK
18	2					plots
20	1	5/29/14 1:31 p.m.	200 V	room T (24.1)		plots	tails 512-639
20	2					plots
23	1	5/29/14 1:42 p.m.	200 V	room T (24.5)		plots	OK
23	2					plots
25	1	5/29/14 1:50 p.m.	200 V	room T (24.0)		plots	OK; bad latency for one cal group?
25	2					plots
27	1	5/29/14 1:59 p.m.	200 V	room T (24.5)		plots	high noise 203, 300-302, low noise 622, 625
27	2					plots

Search/Navigation: