Contents:
Shelves
ID Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Date Notes Shasta COB 2-1 X COB 2-2 120606 Freel X COB 3-2 120607 Olancha X COB 3-4 120607 Keynot X COB 3-1 120607 Darwin X COB 2-3 120607 Ritter X COB 3-5 120607 Whitney 14 slots
COBs
ID Site 0 Site 1 Site 2 Site 3 Site 4 Date Notes 2-1 2012-06-05 Back from JLAB 120525 – switch broken 120605 2-2 DTM 2-7 (445F63) DPM 2-2 (19CD57) DPM 2-7 (19D013) 2012-06-05 Back from JLAB 120525, 2-3 DTM 2-8 (44555C) DPM 2-10 (19DC05) 120605 3-1 DTM 2-6 (445D84) DPM 2-6 (19C145) 120503 Blue LED doesn't light (120605); Fixed (120606) 3-2 DTM 2-3 DPM 2-1 120607 3-4 DTM 2-2 (44810B) DPM 2-12 (198C40) 120605 3-5 DTM 2-4 (445FC5) DPM 2-5 (19A827) 120605
green health LED not lighting (120605); Fixed (120606)
"No devices detected on the JTAG chain"
(120604)
DTMs
ID Serial No. MAC Firmware EEPROM System 0 System 1 Date Notes 1-2 Bad. DO NOT USE. 2-1 868 0.8.0 prod 2.2, 8?? rescue 2.2, 8xx 2012-05-02 2-2 000000445F63 868 0.8.0 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-3 868 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 120607 Filed down power connectors: don't screw down front side 2-4 000000445FC5 868 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-5 868 0.8.0 prod 2.2, 927M rescue 2.2, 927M 2012-05-02 EEPROM Read errors; Disrupts JTAG to the DPMs 2-6 000000445D84 868 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2-7 00000044555C 868 2-8 000000445F63 868 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31
08:00:56:00:41:38
08:00:56:00:41:32
08:00:56:00:41:33
08:00:56:00:41:34
08:00:56:00:41:XX
08:00:56:00:41:36
08:00:56:00:43:06
08:00:56:00:41:38
DPM 405s
ID Ser. No. MAC Firmware EEPROM System 0 System 1 Date Notes 2-1 000000197519 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-2 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-3 000000197DAD 917 0.8.0 2012-05-03 Fails: peb 0 exception 0x8baec1 edw 0x5f transferred 0; EEPROM Read errors. XMD gives: C103 scraped off. 2-4 00000019B108 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 Programming f/w took two attempts; XMD 'dow'ing devel and 'con'ing causes crash to 0x700. XMD gives: C76 and R22 scraped off. 2-5 00000019A827 917 0.8.0 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-6 00000019C145 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-7 00000019D013 917 prod 2.2, 1088:1104 rescue 2.2, 1088:1104 2012-05-31 OK 2-8 000000196E67 Bad. XMD gives: 2-9 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-10 00000019DC05 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK 2-11 000000197D2F Mark says board is bad. XMD gives: 2-12 000000198C40 917 prod 2.2, 927M rescue 2.2, 927M 2012-05-03 OK
08:00:56:00:42:fc
08:00:56:00:42:f7
08:00:56:00:42:f9
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:XX
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:f5
08:00:56:00:42:fa
08:00:56:00:42:f8
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:f4
08:00:56:00:42:fb
08:00:56:00:42:XX
ERROR: Unable to STOP PowerPC Processor
Check: (1) If the FPGA is Configured Correctly (or)
(2) If Processor Reset and Clock Ports are Connected Correctly
08:00:56:00:42:f6
DPM 440s
ID Ser. no. MAC Firmware MemTest EEPROM System 0 System 1 Date Notes 04 000000457E18 08:00:56:00:43:01 DpmTest_DB000018 Passed 2012-05-29 06 08:00:56:00:43:XX DpmTest_DB000018 Passed 2012-05-29 07 00000045403A 08:00:56:00:43:00 DpmTest_DB000018 Passed 2012-05-29 09 DpmTest_DB000018 Not loadable 2012-05-30 impact works, xmd doesn't 12 000000455233 08:00:56:00:43:02 DpmTest_DB000018 Passed 2012-05-30 14 000000456FB5 08:00:56:00:43:03 DpmTest_DB000018 Passed 2012-05-30
RTMs
ID EEPROM Date Notes 2-1 2012-05-xx 2-2 2012-05-xx