TODO: General introduction to the project
Table of contents
Useful resources
- Jira Kanban board for this project
- TID-ID Edge Computing Systems
- Presentations:
- Concept Design summary presentation (Sharepoint)
Design
Mechanical design
TODO:
Electronics design
Concept boards for 2x3 sensor modules
| Multi-board assembly | Readout Board | ASIC Carrier Board | |
|---|---|---|---|
| 3D view |
|
|
|
| Name | ePixUHR35kfps-2x3-concept | ePixUHR35kfps-2x3-readout-board-concept | ePixUHR35kfps-2x3-ASIC-carrier-board-concept |
| Altium 365 project | https://stanford-linear-accelerator-center.365.altium.com/designs/1C32F53F-0F7D-4FA6-A6A2-A68D0AD370D8 | ||
| Dimensions (X x Y) | N/A | 59mm x 130mm | 59mm x 42mm |
TODO
- Trade study complete material (shared with gt readout)
ASIC
The ePixUHR 35 kHz ASIC is used in this project.
Resources:
- Confluence page (restricted)
- iWoRiD 2023 presentation: ePixUHR-35kHz: a read-out ASIC for tender X-ray imaging at LCLS-II with 35 kHz frame-rate
Size and measurements
These measurements are taken from a GDS file (ePixUHR_35kHz_APonly.gds) that was opened in KLayout.
| Full matrix | Lower left corner | Lower right corner | |
|---|---|---|---|
| Image |
|
|
|
| Measurements |
|
|
|
Altium footprint
A footprint has been created in Altium Designer for the ASIC. The sizes and measurements listed above have been used and rounded to the nearest µm.
| Full matrix | Lower left corner | Lower right corner | |
|---|---|---|---|
| Image |
|
|
|
| Measurements |
|
|
|
Meeting notes
- Notes from the design team meetings
- Notes from beam line and design teams meetings
Overview
Content Tools