TODO: General introduction to the project
Table of contents
Useful resources
- Jira Kanban board for this project
- TID-ID Edge Computing Systems
- Presentations:
- Concept Design summary presentation (Sharepoint)
Design
Mechanical design
TODO:
- List of drawings and links to team center
Electronics design
Concept boards
| Readout Board | ASIC Carrier Board | |
|---|---|---|
| 3D view | ||
| Name | ePixHR35kfps-readout-board-concept | ePixHR35kfps-ASIC-carrier-board-concept |
| Altium 365 project | https://stanford-linear-accelerator-center.365.altium.com/designs/1C32F53F-0F7D-4FA6-A6A2-A68D0AD370D8 | |
| Dimensions (X x Y) | 55 mm x 130 mm |
TODO
- List of project files and links to altium
- Trade study complete material (shared with gt readout)
ASIC
The ePixUHR 35 kHz ASIC is used in this project.
Resources:
- Confluence page (restricted)
- iWoRiD 2023 presentation: ePixUHR-35kHz: a read-out ASIC for tender X-ray imaging at LCLS-II with 35 kHz frame-rate
Size and measurements
These measurements are taken from a GDS file (ePixUHR_35kHz_APonly.gds) that was opened in KLayout.
| Full matrix | Lower left corner | Lower right corner | |
|---|---|---|---|
| Image | |||
| Measurements |
|
|
|
Altium footprint
A footprint has been created in Altium Designer for the ASIC. The sizes and measurements listed above have been used and rounded to the nearest µm.
| Full matrix | Lower left corner | Lower right corner | |
|---|---|---|---|
| Image | |||
| Measurements |
|
|
|
Meeting notes
- Notes from the design team meetings
- Notes from beam line and design teams meetings
Overview
Content Tools