YARR DAQ "FELIX" Workstation with 1 Spec PCIe card in Lab C
Introduction
felix2
from rddev111.
Overview
Individual Components
Device | Photos |
---|---|
PC | "FELIX" Workstation (taken from Matthias' office) |
DAQ Card | YARR DAQ (Trenz TEF 1001-02) card & Ohio State Adapter card connected to the PC In: PCIe 3.0 / Out: Mini-Displayport The card is connected to the |
RD53A Module | RD53A module is connected to the DAQ system for testing & GUI development purposes. (Note that this is the module that Zijun has worked on previously, and there are some non-trivial caveats regarding its data transmission.) |
Power Supply | BK Precision 1787A DC Power Supply Nominal Setting for RD53A: |
Raspberry Pi (Control System) | Raspberry Pi is used for the online monitoring camera and the power supply control. The power supply is controlled by `channel 1` of the relay switch module. |