Confluence will be down for maintenance June 14 2024 at 6AM PT.
L1Proc and halfPipe. Every time a red cross appears on the Data Processing page, next to the L1Proc or halfPipe processing status bar, the Level 1 on-call expert will be paged. We are not on-call for ASP/GRB search (Jim Chiang is on call for these failures) and we are definitely NOT on-call for infrastructure problems (can't see monitoring plots, etc.). If you get paged for something that is not under your responsibility, don't try to fix it: forward the message to the appropriate people and report everything in the Ops Log.
There are 3 main type of failures, and should be handled differently.
How to recognize transient failures: they usually affect only one single job (disk or DB failures), or a small number of jobs all on the same machine (LFS failure). If a process complains about a missing file but the file exists, or gets a read error after opening a file, it's probably a disk server hiccup. If the log file ends suddenly, without the usual LSF postlog, the batch host probably crashed. There will probably be several jobs failing the same way at the same time.
What to do in case of transient failures: rollback the affected process(es) when possible (see below for the rollback procedure). Look for the dontCleanUp file and check the Log Watcher (see below). If recon segfaults for no apparent reason, email Heather and Anders before the rollback, including a link to the log file, which will tell them where the core file is.
How to recognize infrastructure failures: they usually affect a large number of jobs, either on the same LSF host or on different LSF hosts.
What to do in case of infrastructure failures: these failures involve a large number of people to be taken care of (the infrastructure expert on-call and often also the SCCS), so for the time being still page Warren and/or Maria Elena (see L1 shift schedule) if you think that one of those failures might be happening during the night (if in doubt, page anyways).
If recon dies complaining about g4propagator, we can't fix it.
In either of the above cases, email Heather and Anders. Include a link to the log file, which will tell them where the core file is.
If trending merges complain about overlapping chunks, tell Bryson and datamonlist@glast2.Stanford.EDU. Rollback won't help.
Any time one of the merges processes can't find all of its input files, a message is generated in the Log Watcher and cleanup for the run is disabled by a file called dontCleanUp in the run directory on u52/L1. All cleanup jobs will fail if the dontCleanUp file is present. If everything is OK (see instructions below), that file can be removed and the jobs rolled back.
To check that everything is OK, follow these steps:
Any time one of these messages is generated, cleanup for the run is disabled by a file called dontCleanUp in the run directory on u52/L1. All cleanup jobs will fail if that file is present. If everything is OK, that file can be removed and the jobs rolled back (remember to clean up first the chunks and then the entire run... you'll get an error otherwise).
Tired of being paged because L1Proc status still says Failed after a rollback?
/afs/slac/g/glast/ground/bin/pipeline --mode PROD createStream --define "runNumber=240831665,l1RunStatus=Running" setL1Status
OR:
/afs/slac/g/glast/ground/bin/pipeline --mode PROD createStream --define "runNumber=240837713" setL1Status
l1RunStatus defaults to Running, but you can set it to any of the allowed values.