Contents:
Shelves
ID Slots EEPROM Date Notes Shasta 5 Freel 5 Olancha 5 Keynot 5 Whitney 14
COBs
ID Firmware Date Notes 2-3 2012-05-02 "Golden" in slot 5; Wonky handle switch 3-1 2012-05-03 3-2 2012-05-03 DTM 2-4, DPMs 2-7,2-12
DTMs
ID MAC Firmware EEPROM System 0 System 1 Date Notes 2-1 8xx 0.8.0 prod 2.2.8xx rescue 2.2.8xx 2012-05-02 2-2 927M 0.8.0 2-3 2-4 927M ? prod 2.2/927M rescue 2.2/927M 2012-05-03 OK 2-5 927M 0.8.0 prod 2.2/925 rescue 2.2/927M 2012-05-02 EEPROM Read errors; Disrupts JTAG to the DPMs 2-6 2-7 2-8
08:00:56:41:38
08:00:56:41:XX
08:00:56:41:XX
08:00:56:41:34
08:00:56:41:XX
08:00:56:41:XX
08:00:56:41:XX
08:00:56:41:XX
DPMs
ID MAC Firmware EEPROM System 0 System 1 Date Notes 2-1 925 prod 2.2.925 rescue 2.2.925 2012-05-03 OK 2-2 927M prod 2.2.925 rescue 2.2.925 2012-05-xx Missing? 2-3 925 0.8.0 prod 2.2.xxx rescue 2.2.xxx 2012-05-03 Fails: peb 0 exception 0x8baec1 edw 0x5f transferred 0; EEPROM Read errors 2-4 925 prod 2.2.925 rescue 2.2.925 2012-05-03 Programming f/w took two attempts; XMD 'dow'ing devel and 'con'ing causes crash to 0x700 2-5 925 0.8.0 prod 2.2.925 rescue 2.2.925 2012-05-03 OK 2-6 925 prod 2.2.925 rescue 2.2.925 2012-05-03 OK 2-7 925 prod 2.2.925 rescue 2.2.925 2012-05-03 OK 2-8 prod 2.2.925 rescue 2.2.925 2012-05-xx Missing? 2-9 925 prod 2.2.925 rescue 2.2.925 2012-05-03 OK 2-10 925 prod 2.2.925 rescue 2.2.925 2012-05-03 OK 2-11 Mark says board is bad 2-12 925 prod 2.2.925 rescue 2.2.925 2012-05-03 OK
08:00:56:42:fc
08:00:56:42:XX
08:00:56:42:f9
08:00:56:42:XX
08:00:56:42:f5
08:00:56:42:fa
08:00:56:42:f8
08:00:56:42:XX
08:00:56:42:f4
08:00:56:42:fb
08:00:56:42:XX
08:00:56:42:f6
RTMs
ID Firmware Date Notes 2-1 2012-05-xx 2-2 2012-05-xx