Usage:   calibrun [options] args
Example: calibrun -e xppi0613 -d CSPAD,OPAL1000 -c ./calib -P -D -r 173

calibrun - command line calibration utility

Options:
  -h, --help            show this help message and exit
  -e EXP, --exp=EXP     experiment name, ex.: cxi12345
  -r RUNNUM, --run=RUNNUM
                        run number
  -n NUM_EVENTS, --num_events=NUM_EVENTS
                        number of events to process
  -s SKIP_EVENTS, --skip_events=SKIP_EVENTS
                        number of events to skip before processing
  -m SCAN_EVENTS, --scan_events=SCAN_EVENTS
                        number of events to scan data and search for selected
                        detector(s)
  -f EVENT_CODE, --event_code=EVENT_CODE
                        event code for dark event selection
  -t THR_RMS, --thr_rms=THR_RMS
                        threshold on rms for hot pixel mask evaluation
  -v RUNRANGE, --runrange=RUNRANGE
                        validity run range, ex.: 123-567 or 123-end
  -q QUEUE, --queue=QUEUE
                        queue name, ex: psnehq, psfehq, psanacsq. If specified
                        - run in batch
  -w WORKDIR, --workdir=WORKDIR
                        work directory, ex: ./work
  -c CALIBDIR, --calibdir=CALIBDIR
                        non-standard calibration directory, ex: ./calib
  -x XTCDIR, --xtcdir=XTCDIR
                        non-standard path to xtc directory(<INS>/<EXP>/xtc are
                        required), ex: .mydir/xpp/xppi0613/xtc, or
                        /reg/d/ffb/cxi/cxi12345/xtc
  -d DETECTOR, --detector=DETECTOR
                        detector names separated by comma,
                        ex:CSPAD,CSPAD2x2,PNCCD
  -p PRINT_BITS, --print_bits=PRINT_BITS
                        0-print nothing, +1-debug, +2-info, +4-warning,
                        +8-error, +16-critical; default=036, minimal
                        recommended=020
  -P, --process         process xtc files and produce calib files under the
                        "work" directory
  -D, --deploy          deploy calibrated files under the "calib" directory
  -L, --loadcfg         load and use configuration parameters from file after
                        "calibman"