Useful info on SXRSS station (previous version), including motor controller manuals: https://slacspace.slac.stanford.edu/sites/controls/Pages/controls_ops_maint_docs.aspx?RootFolder=%2Fsites%2Fcontrols%2FControls%20Operations%20and%20Maintenance%20Documents%2FSXRSS&FolderCTID=0x012000744B460676FF8B4E93C32481DA33D454&View={B1383413-F36B-4C80-A458-99D04B3253F7}
SLIT X
No physical limit switches on these slits.
02/02/2024: Position limits:
Slit fiducialization motion measurements in Jan/24/2024 can refer to slide: Slit_fiducialization_motion.pptx (sharepoint.com)
- 0.915mm (High limit)
- -1.292mm (Low limit)
10/10/2022: Position limits:
...
- 0.938 mm (High limit)
- -1.547 mm (Low limit)
Can use HomeR or HomeF – Forward homes it to 0.3mm and Reverse homes it to 0.0mm
...
For regular moves, use 0.2mm/sec speed
Ensure retry count is reduced to 1
When the motor is power cycled, the motor needs to be calibrated and homed by following the instructions:
Image Added
-------------------------------------------------------------------------------------------------------------------------------
...
No physical limit switches on these slits.
02/02/2024: Position limits:
Slit fiducialization motion measurements in Jan/24/2024 can refer to slide: Slit_fiducialization_motion.pptx (sharepoint.com)
- 15.455mm (High limit)
- P6: Stay clear position: 15.4mm
- Sapphire lower edge: 5.350mm
- P5: Sapphire middle: 2.3mm
- Sapphire Upper edge: -0.750mm
- P4: Slit 5: -7.950mm
- P3: Slit 4: -9.450mm
- P2: Slit 3: -10.950mm
- P1: Slit 2: -12.450mm
- P0: Slit 1: -13.950mm
Image Added
10/10/2022: Position limits:
...
- 15.478 mm (High limit)
- Low limit did not check
- HomeF: went into zero position positive direction
...
For regular moves, use 0.2mm/sec speed
Ensure retry count is reduced to 3
When the motor is power cycled, the motor needs to be calibrated and homed by following the instructions:
Image Added
In addition, a slit target positions GUI is added for users convenience, they can just press P* buttons to move the motor to setting positions.
Image Added
-------------------------------------------------------------------------------------------------------------
...
- 55.0332 mm (High limit) – aisle side limit; all the way in(?)
- 32.9301 mm (Low limit) - wall side limit, out ;
NEED to confirm what value is OUT of beam
...
9/9/2022: Position limits:
...