...
- Change
/etc/init.d/st.gwEbeamServe
on lcls-daemon3 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwEbeamServe64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-daemon3]$ /etc/init.d/st.gwEbeamServe restart |
- Verify that all LCLSIOC subnet PVs except for
OTRS:DMP1:695:*
PVs can be seen from Photon/PCDS subnet clients. - Verify that the lclshome->Network (Global)->PV Gateway Diag->Ebeam Serve display is repopulated after the restart.
- Check /u1/lcls/tools/gateway/gwEbeamServe.log for errors.
gwEbeamServeWF:
- Change
/etc/init.d/st.gwEbeamServeWF
on lcls-daemon3 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwEbeamServeWF64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-daemon3]$ /etc/init.d/st.gwEbeamServeWF restart |
- Verify that only
OTRS:DMP1:695:*
PVs can be seen from Photon/PCDS subnet clients.
lcls-daemon10
gwLCLS4FACET:
- Verify that the lclshome->Network (Global)->PV Gateway Diag->Ebeam Serve WF display is repopulated after the restart.
- Check /u1/lcls/tools/gateway/gwEbeamServeWF.log for errors.
...
lcls-daemon10
gwLCLS4FACET:
- Change
/
Change /etc/init.d/st.gwLCLS4FACET
on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4FACET64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-daemon10]$ /etc/init.d/st.gwLCLS4FACET restart |
- Verify that LCLSIOC subnet PVs can be seen from FACETCA subnet clients.
gwLCLS4LCLSII:
- Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS 4 FACET display is repopulated after the restart.
- Check /u1/lcls/tools/gateway/gwLCLS4FACET.log for errors.
gwLCLS4LCLSII:
- Change
/etc/init.d/st.gwLCLS4LCLSII
on lcls-Change /etc/init.d/st.gwLCLS4LCLSII
on lcls-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLS4LCLSII_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-daemon10]$ /etc/init.d/st.gwLCLS4LCLSII restart |
- Verify that LCLSIOC subnet PVs can be seen from LCLS2IOC subnet clients.
- Check /u1/lcls/tools/gateway/gwLCLS4LCLSII.log for errors.
...
lcls-lcls-prod01
gwLCLSPUB:
- Change
/etc/init.d/st.gwLCLSPUB
on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSPUB64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSPUB restart |
- Verify that LCLS production PVs can be seen when running
lclshome
on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin). - Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS PUB display is repopulated after the restart.
- Check /nfs/slac/g/lcls/tools/gateway/gwLCLSPUB.log for errors.
gwLCLSARCH0:
Note |
---|
|
Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly. |
- Change
/etc/init.d/st.gwLCLSARCH0
on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH0_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH0 restart |
lcls-homeVerify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH0 display is repopulated after the restart.
Check /nfs/slac/g/lcls/tools/gateway/gwEbeamServegwLCLSARCH0.log
Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH0.dat
...
# allow everthing, deny patterns
EVALUATION ORDER ALLOW, DENY
.* ALLOW
^[A-Za-z0-9]+:UND1:.* DENY
^[A-Za-z0-9]+:LTU1:.* DENY
^[A-Za-z0-9]+:LTU0:.* DENY
^[A-Za-z0-9]+:DMP1:.* DENY
^[A-Za-z0-9]+:IN20:.* DENY
^[A-Za-z0-9]+:BSY0:.* DENY
^[A-Za-z0-9]+:BSYA:.* DENY
^[A-Za-z0-9]+:MCC0:.* DENY
^[A-Za-z0-9]+:SYS0:.* DENY
^[A-Za-z0-9]+:LR20:.* DENY
^[A-Za-z0-9]+:NEH:.* DENY
^[A-Za-z0-9]+:NEH1:.* DENY
^[A-Za-z0-9]+:FEH:.* DENY
^[A-Za-z0-9]+:FEH1:.* DENY
^[A-Za-z0-9]+:FEE1:.* DENY
^[A-Za-z0-9]+:SYS2:.* DENY
^[A-Za-z0-9]+:CLTH:.* DENY
^[A-Za-z0-9]+:GUNB:.* DENY
^[A-Za-z0-9]+:LGUN:.* DENY
^[A-Za-z0-9]+:ALH2:.* DENY
^[A-Za-z0-9]+:ALH0:.* DENY
^[A-Za-z0-9]+:ACR0:.* DENY
^[A-Za-z0-9]+:GBL0:.* DENY
^[A-Za-z0-9]+:R02:.* DENY
^[A-Za-z0-9]+:XRT1:.* DENY |
gwLCLSARCH1:
Note |
---|
|
Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly. |
- Change
/etc/init.d/st.gwLCLSARCH1
on lcls-daemon10 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH
1_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH1 restart |
Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH1.dat
...
# deny everything, allow the patterns
# For every allow pattern here, we should have a deny pattern in gwLCLSARCH0.dat; otherwise we'll get duplicate PVs
EVALUATION ORDER DENY, ALLOW
.* DENY
^[A-Za-z0-9]+:UND1:.* ALLOW
^[A-Za-z0-9]+:LTU1:.* ALLOW
^[A-Za-z0-9]+:LTU0:.* ALLOW
^[A-Za-z0-9]+:DMP1:.* ALLOW
^[A-Za-z0-9]+:IN20:.* ALLOW
^[A-Za-z0-9]+:BSY0:.* ALLOW
^[A-Za-z0-9]+:BSYA:.* ALLOW
GWLCLSARCH1:.* ALLOW |
gwLCLSARCH2:
Note |
---|
|
Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly. |
- Change
/etc/init.d/st.gwLCLSARCH2
on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH
2_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH2 restart |
Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH2.dat
...
# deny everything, allow the patterns
# For every allow pattern here, we should have a deny pattern in gwLCLSARCH0.dat; otherwise we'll get duplicate PVs
EVALUATION ORDER DENY, ALLOW
.* DENY
^[A-Za-z0-9]+:MCC0:.* ALLOW
^[A-Za-z0-9]+:SYS0:.* ALLOW
^[A-Za-z0-9]+:LR20:.* ALLOW
^[A-Za-z0-9]+:NEH:.* ALLOW
^[A-Za-z0-9]+:NEH1:.* ALLOW
^[A-Za-z0-9]+:FEH:.* ALLOW
^[A-Za-z0-9]+:FEH1:.* ALLOW
^[A-Za-z0-9]+:FEE1:.* ALLOW
^[A-Za-z0-9]+:ALH0:.* ALLOW
^[A-Za-z0-9]+:ACR0:.* ALLOW
^[A-Za-z0-9]+:GBL0:.* ALLOW
^[A-Za-z0-9]+:R02:.* ALLOW
^[A-Za-z0-9]+:XRT1:.* ALLOW
GWLCLSARCH2:.* ALLOW |
gwLCLSARCH3:
Note |
---|
|
Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly. |
for errors.
gwLCLSARCH1:
Note |
---|
|
Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly. |
- Change
/etc/init.d/st.gwLCLSARCH1
on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH
1_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH1 restart |
- Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH1 display is repopulated after the restart.
- Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH1.log for errors.
gwLCLSARCH2:
Note |
---|
|
Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly. |
- Change
/etc/init.d/st.gwLCLSARCH2
on lcls-prod01 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH
2_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH2 restart |
Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH2 display is repopulated after the restart.
- Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH2.log for errors.
gwLCLSARCH3:
Note |
---|
|
Archiver Gateways should be stopped and restarted one at a time to independently verify that ACLs are working properly. |
- Change
/etc/init.d/st.gwLCLSARCH3
on lcls-daemon10 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH3_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH3 restart |
Verify that the lclshome->Network (Global)->PV Gateway Diag->LCLS ARCH3 display is repopulated after the restart.
Check /nfs/slac/g/lcls/tools/gateway/gwLCLSARCH3.log for errors.
- Change
/etc/init.d/st.gwLCLSARCH3
on lcls-daemon10 to use CMDPATH=/afs/slac/g/lcls/tools/gateway/script/st.gwLCLSARCH3_64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ /etc/init.d/st.gwLCLSARCH3 restart |
Verify that the following PV patterns are archived in the LCLS Archiver according to the permissions below:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls-prod01]$ cat $TOOLS/gateway/config/gwLCLSARCH3.dat
...
# deny everything, allow the patterns
# For every allow pattern here, we should have a deny pattern in gwLCLSARCH0.dat; otherwise we'll get duplicate PVs
EVALUATION ORDER DENY, ALLOW
.* DENY
^[A-Za-z0-9]+:SYS2:.* ALLOW
^[A-Za-z0-9]+:CLTH:.* ALLOW
^[A-Za-z0-9]+:GUNB:.* ALLOW
^[A-Za-z0-9]+:LGUN:.* ALLOW
^[A-Za-z0-9]+:ALH2:.* ALLOW
GWLCLSARCH3:.* ALLOW
...
lcls2-daemon10
gwLCLSII4LCLS:
- Change
/etc/init.d/st.gwLCLSII4LCLS
on lcls2-daemon10 to use CMDPATH=/usr/local/lcls/tools/gateway/script/st.gwLCLSII4LCLS64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[laci@lcls2-daemon10]$ /etc/init.d/st.gwLCLSII4LCLS restart |
Verify that LCLS2IOC subnet PVs are readable and writable from LCLSIOC subnet clients.
Check /u1/lcls/tools/gateway/gwLCLSII4LCLS.log for errors.
...
Anchor |
---|
| FACET Gateway Test Procedures |
---|
| FACET Gateway Test Procedures |
---|
|
...
- Change
/etc/init.d/st.gwACCTESTPUB
on testfac-daemon2 to use CMDPATH=/afs/slac/g/acctest/tools/gateway/script/st.gwACCTESTPUB64
Restart gateway:
Code Block |
---|
language | bash |
---|
theme | Midnight |
---|
|
[acctf@testfac-daemon2]$ /etc/init.d/st.gwACCTESTPUB restart |
- Verify that ACCTESTFAC subnet PVs can be seen when running
xtahome
on LCLSDEV/LCLSDMZ nodes (e.g., mcclogin).
...
Anchor |
---|
| Cryo Gateway Test Procedures |
---|
| Cryo Gateway Test Procedures |
---|
|
Cryo Gateway Test Procedures
...