Excerpt |
---|
Half-module # | Contains hybrid | Contains sensor | Hybrid glued | Sensor glued | Sent to UCSC | HV wirebonded | Signals wirebonded | QA tested | Results | Sent to SLAC | Mounted to cooling block | Part of module | Notes |
---|
Half-module 0 - THE GIMP | Hybrid 0 | Sensor 1803 | to fixture | lousy | with a prayer | mashed bonds | painfully | ? test 1 | 4 chips bonded, and 4 are alive. 3 of them are both bonded and alive. | ? | never | Module ? |
|
...
...
? test 1
...
OK
...
...
...
...
Damaged signal wirebonds observed: probable shorts first ~40 channels. | Half-module 3 | Hybrid 1t | Sensor 132 | 3/10/12(TKN) | 3/10/12(TKN) | 3/12/12 (TKN) | 3/12/12(FM) | 3/13/12(FM) | 3/13/12 test 1 3/14/12 (OM, VF) |
|
...
...
) Chan 625 unbonded, 627 dead. High noise is only on run 2 - believed due to noisy electrical contact between CF and baseplate. | | | | Cont'ed on next line | Cont'ed No 3 | | | | | | | Chan 625 fixed, 3/22/12(FM) | 3/23/12 test 6 | 627 dead, else OK: test 6 | 3/23/12 (PH) |
|
...
...
...
...
...
...
...
...
...
...
Half-module 6
...
Hybrid 07t
...
Sensor 138
...
3/18/12(TKN)
...
3/18/12(TKN)
...
?
...
?
...
?
...
? test 1
...
?
...
...
...
...
...
...
...
...
...
...
...
...
To add a half-module, copy the line below into the table and fill in the ?s.
No Format |
---|
|[Half-module ?] | [Hybrid ?] | [Sensor ?] | ? | ? | ? | ? | ? | ? [test 1|Half-module ?, test 1]| ? | ? | ? |[Module ?]| PROCESSING |
|
Add Page |
---|
template | Half-module template |
---|
parent | @self |
---|
prefix | Half-module |
---|
linkText | Add half-module page |
---|
|
Half-module Channel Mapping
Link to DAQ page.