10/2/2014 SVT DAQ System Layout

THIS PAGE MAY BE OUTDATED

The following DAQ map is based on the projected cable lengths and planned mechanical layout.

Front End Board (FEB) ID	FEB Hybrid ID	SVT Layer	Half-Module Layer*	Orientation	Volume
0	0	1	1	Axial	Top
0	1	1	2	Stereo	Top
1	0	2	3	Axial	Top
1	1	2	4	Stereo	Top
1	2	3	5	Axial	Top
1	3	3	6	Stereo	Top
2	0	4	7	Axial	Top
2	1	4	7	Axial	Top
2	2	4	8	Stereo	Top
2	3	4	8	Stereo	Top
3	0	5	9	Axial	Top
3	1	5	9	Axial	Top
3	2	5	10	Stereo	Top
3	3	5	10	Stereo	Top
4	0	6	11	Axial	Top
4	1	6	11	Axial	Top
4	2	6	12	Stereo	Top
4	3	6	12	Stereo	Top

Front End Board (FEB) ID	FEB Hybrid ID	SVT Layer	Half-Module Layer*	Orientation	Volume
5	0	1	1	Stereo	Bottom
5	1	1	2	Axial	Bottom
6	0	2	3	Stereo	Bottom
6	1	2	4	Axial	Bottom
6	2	3	5	Stereo	Bottom
6	3	3	6	Axial	Bottom
7	0	4	7	Stereo	Bottom
7	1	4	7	Stereo	Bottom
7	2	4	8	Axial	Bottom
7	3	4	8	Axial	Bottom
8	0	5	9	Stereo	Bottom
8	1	5	9	Stereo	Bottom
8	2	5	10	Axial	Bottom
8	3	5	10	Axial	Bottom
9	0	6	11	Stereo	Bottom
9	1	6	11	Stereo	Bottom
9	2	6	12	Axial	Bottom
9	3	6	12	Axial	Bottom

EPICS Channel Mapping

Following the DAQ channel ordering and the sensor strip channel numbering the conversion between the two is summarized below.