Versions Compared

Old Version 3

changes.mady.by.user Dawood Alnajjar

Saved on

compared with

New Version 4

changes.mady.by.user Dawood Alnajjar

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Once you have the carrier hooked up, and the detector assembled, connected to the cooling system, power and fiber optics, you can power up the detector. For carrier evaluation, you do not need to connect timing fiber optics.

Once powered up, you will see the current consumption go to 1.7Amps, then go down to ~945mAmps when the FPGA is configured. Once the ASICs are configured, the current consumption will go up to 3.2Amps if all ASICs are available.