Page History

...

1. Data monitoring folks make a CCB request to deploy new limits. Wait for that to be approved.
2. To figure out where the limits are:
   1. Go to the L1 install directory (currently /afs/slac.stanford.edu/g/glast/ground/PipelineConfig/Level1/5.9)
   2. grep alarmCfgBase config.py (currently /afs/slac/g/glast/ground/releases/volume11/AlarmsCfg)
3. Go to the location of alarmsCfg (currently /afs/slac/g/glast/ground/releases/volume11/AlarmsCfg)

4. Check out the code from github:

   Code Block
   language bash
   export tag=AlarmsCfg-07-00-37 wget -O - https://github.com/fermi-lat/AlarmsCfg/archive/$tag.tar.gz | tar xzv mv AlarmsCfg-$tag $tag

5. Remove the current links for test, dev, and prod, and replace them with the new version
6. If possible, switch the links in between deliveries. It is acceptable to have a mix of old and new configs for a run
7. Update the CCB request

...

1. and mark "Implemented"

Related articles

...