YARR DAQ "FELIX" Workstation with 1 Spec PCIe card in Lab C

Contact: Sanha Cheong (sanha@stanford.edu) and/or or Zijun Xu (zijun.xu@cern.ch)

Introduction

This is a YARR DAQ test bench for electrical/DAQ testing & YARR GUI development.

...

The PC is accessible via machine name felix2 from rddev111.

Image Added

Device	Photos
Workstation PC ``felix2``	"FELIX" Workstation ``felix2`` (taken from Matthias' office)
DAQ Card	YARR DAQ (Trenz TEF 1001-02) card & Ohio State Adapter card connected to the PC In: PCIe 3.0 into the PC / Out: Mini-DisplayportDisplayPort out for the module The card is connected to the the ``CPU SLOT6 PCI-E 3.0 X16` ` slot of the PC
RD53A Module	RD53A module is connected to the DAQ system for testing & GUI development purposes. (Note that this is the module that Zijun has worked on previously, and there are some non-trivial caveats regarding its data transmission.)
Power Supply	BK Precision 1787A DC Power Supply Nominal Setting for RD53A: Constant Voltage (C.V.) mode Output Voltage 1.8V Output Current 1.5A (max.)
Raspberry Pi (Control System)	Raspberry Pi is used for the online monitoring camera and the power supply control. The power supply is controlled by `channel 1` ``channel 1`` of the relay switch modulecard.