Page History

...

We have a convenience script for Gige cameras that can be called from the command line called "gige". In case "which gige" does not return anything, this script is located at /reg/g/pcds/engineering_tools/<hutch>/scripts. This should be on the path for <hutch>opr accounts if the currently existing .bashrc was sane enough.

...

Motor screens can be found in various formats at various places in the different hutches. If you are interested in the "expert" screen for most of our motor types, you can use

(/reg/g/xpp/scripts/)motor-expert-screen <PVNAME> where PVNAME is e.g. XPP:SB2:MMS:19

...

 If a PV gives you trouble, a first good step is to see if the IOC is up stably and possibly reboot it. For that you will use the IOC manager which has a user guide here and is started via iocmanager. This guides describes how to start it and how to it works. More detailed information for commonly used IOCs can be found below.

IPIMB

...

/Wave8

The configuration GUI for your IPIMB or Wave8 boxes can be started using: "ipmConfigEpics <-b boxname>". If you don't pass the "-b" option, you get a list of ipimb boxes relevant for your hutch. 

A troubleshooting guide can be found here: See IPIMB Troubleshooting for Controls IPIMBs.

...