Page History
...
Code Block |
---|
/reg/d/psdm/CXI/cxi80410/calib/CsPad::CalibV1/CxiDs1.0:Cspad.0/centergeometry/1142-end.data |
The file name consists of the run range followed by the .data
extension, for example, 0-end.data
, 11-end.data
, 47-52.data
, etc.
Description of types
Recommended calibration type
In 2014 new universal detector geometry software is implemented and documented in the Detector Geometry page. In this approach detector geometry calibration information is located in a single file of type
geometry
- contains hierarchical description of all detector components; for example for CSPAD, sensors' location and rotation in the quads, quads - in the detector, detector - in the setup, etc.
Currently all psana modules which deals with image and pixel coordinates can work with calibration type geometry
.
Deprecated calibration types
All CSPAD geometry alignment parameters are split for 9 types:
...
File format for calibration types
geometry
See for details Detector Geometry.
center
Tail of the path: center/<run-range>.data
Parameters: x,y,z coordinates of 8 2x1 centers in 4 quads in pixels:
...
- Note about organization of the calibration database: CsPad calibration in translator.