T9/PS run Daily Briefings
...
- 3PM
Date | Room
| Communications | Online report
| Offline report
| Run program
| Notes
|
---|
july 28
| 13-3-005
| - Magnet failure: MNP17 colling system failure at 1AM stopped data taking for several hours but no damage on hardware. Physics restarted after 2 hours w/o silicon tagger for CAL calibrations. Magnet repaired morning - CU cooling system changes: CU/ISC cooling coil in the ISC base plate leaked: it was emptied and is now non available, we will rely on top cooling coil as no intervention is possible; the chiller was moved closer to the ISC to minimize thermalization of coolant with ambient through thermal exchange with the zone air, now chiller more efficient; fan added to cool XY table motors. Please look at the temperature during your shift
| - DAQ sync studies going on - CU: Ric investigating phasing errors | Francesco: - pipeline nicely running - 1st 1000 evetns in SVAC ntuple duplicated Claudia: - offline monitor requires script to parse rcReport info and link to MC files (Navid working on that)
|
Wiki Markup |
---|
\- MC and CU cooprdinate systems mismatch (check with Philippe)
Dave:
\- no CAL-HI triggers in last night data as fhe values were saturated
\\
\| \- Complete DAQ sync studies
\\
\- perform CU timing studies to optimize TACK (timing/script vs ext trigger manual delay)
\- explore beam conditions
\- ACD calibrations (ideally 5gev p, if NA 5gev e)
\- CAL runs with e (Benoit)
\- Tagger calibration start on 29 morning \| \- Fill elogbook
\- Take your shifts and launch runs yourself
\- rcReport has wrong table positions for runs \[701-736\]; the right correlation table between position and run will be circulated. Please +reset+ runcontrol before starting a new run when you change conditions (table position, beam configuration, trigger, CU conf) \|
|
July 26 - room 13-2-005
10:30 : Safety visit from CERN: minor action items being followed by Luca L.
July 27 - room 13-3-005
Program
July 28 - room 13-3-005
| |
---|
Communications | - Magnet failure: MNP17 colling system failure at 1AM stopped data taking for several hours but no damage on hardware. Physics restarted after 2 hours w/o silicon tagger for CAL calibrations. Magnet repaired morning - CU cooling system changes: CU/ISC cooling coil in the ISC base plate leaked: it was emptied and is now non available, we will rely on top cooling coil as no intervention is possible; the chiller was moved closer to the ISC to minimize thermalization of coolant with ambient through thermal exchange with the zone air, now chiller more efficient; fan added to cool XY table motors. Please look at the temperature during your shift |
Online Report
| - DAQ sync studies going on - CU: Ric investigating phasing errors |
Offline Report
| Francesco: - pipeline nicely running - 1st 1000 evetns in SVAC ntuple duplicated Claudia: - offline monitor requires script to parse rcReport info and link to MC files (Navid working on that) - MC and CU cooprdinate systems mismatch (check with Philippe) Dave: - no CAL-HI triggers in last night data as fhe values were saturated
|
Program | - Complete DAQ sync studies - perform CU timing studies to optimize TACK (timing/script vs ext trigger manual delay) - explore beam conditions - ACD calibrations (ideally 5gev p, if NA 5gev e) - CAL runs with e (Benoit) - Tagger calibration start on 29 morning |
Notes | - Fill elogbook - Take your shifts and launch runs yourself <ac:structured-macro ac:name="unmigrated-wiki-markup" ac:schema-version="1" ac:macro-id="69dbd8ccb29a5165-504a9855-48a94bd9-b903be06-6a3791247c0a1a11b5f0c38d"><ac:plain-text-body><![CDATA[ - rcReport has wrong table positions for runs [701-736]; the right correlation table between position and run will be circulated. Please reset runcontrol before starting a new run when you change conditions (table position, beam configuration, trigger, CU conf) | ]]></ac:plain-text-body></ac:structured-macro> |
...
July 29 - room 32-1-A24
Program
...