Half-module # | Contains hybrid | Contains sensor | Hybrid glued | Sensor glued | Sent to UCSC | HV wirebonded | Signals wirebonded | QA tested | Results | Sent to SLAC | Mounted to cooling block | Part of module | Notes |
|---|
Half-module 0 - THE GIMP | Hybrid 0 | Sensor 1803 | to fixture | lousy | with a prayer | mashed bonds | painfully | ? test 1 | 4 chips bonded, and 4 are alive. 3 of them are both bonded and alive. | ? | never | Module ? | |
Half-module 1 | Hybrid 1 | Sensor 568 | 2/23/12(TKN) | 2/23/12(TKN) | 2/23/12(AG) | 2/27/12(FM) | 2/29/12(FM) | 2/28/12 test 1
2/29/12 test 2
3/4/12 test 3 | OK
Baseline tests by PH show high noise in channel 81 - partial pinhole? | 3/12/12(TKN) | ? | Module ? | READY |
Half-module 2 | Hybrid 0t | Sensor 150 | 3/1/12(TKN) | 3/1/12(TKN) | 3/1/12(OM) | 3/2/12(FM) | 3/6/12(FM) | 3/5/12 test 1
3/7/12 test 2
3/9/12 test 3
3/12/12 test 4
3/12/12 test 5
3/12/12 test 6 | OK | 3/14/12(PH) | ? | Module ? | Damaged signal wirebonds observed: probable shorts first ~40 channels.
|
Half-module 3 | Hybrid 1t | Sensor 132 | 3/10/12(TKN) | 3/10/12(TKN) | 3/12/12(TKN) | 3/12/12(FM) | 3/13/12(FM) | 3/13/12 test 1
3/14/12 (OM, VF) test 2
3/19/12 test 3
3/19/12 test 4
3/23/12 test 6 | High noise? (To retest) Chan 625 unbonded, 627 dead.
High noise is only on run 2 - believed due to noisy electrical contact between CF and baseplate. | | | Module ? | Cont'ed on next line |
Cont'ed No 3 | | | | | | | Chan 625 fixed, 3/22/12(FM) | | | 3/23/12 (PH)
| ? | Module ? | Needs ITT connector |
Half-module 4 | Hybrid 2t | Sensor 134 | 3/10/12(TKN) | 3/10/12(TKN) | 3/12/12(TKN) | 3/14/12(FM) | 3/14/12(FM) | 3/16/12 (TC, VF) test 1
3/17/12 test 2 | Channels 317, 319 shorted, rest is OK. : test 1 | 3/18/12 (VF) | ? | Module ? | READY |
Half-module 5 | Hybrid 3t | Sensor 136 | 3/10/12(TKN) | 3/10/12(TKN) | 3/12/12(TKN) | 3/14/12(FM) | 3/14/12(FM) | 3/19/12 (VF,OM) test 1
3/19/12 test 2
3/19/12 test 3
3/19/12 test 4
3/19/12 test 5
3/19/12 test 7 | OK. | 3/23/12(PH)
| ? | Module ? | Needs ITT connector |
Half-module 6 | Hybrid 7t | Sensor 138 | 3/18/12(TKN) | 3/18/12(TKN) | 3/19/12(TKN/VF) | 3/21/12(FM) noticed scratch on Bias/Guard rings. But IV is OK up to 300V. | 3/22/12(FM) | 3/22/12 test 1
3/22/12 test 2 | OK except channels 0 (no response), 134, 639 (noisy response). Channel 0 is bad b/c of the scratch that connects it with bias ring. | 3/23/12(PH)
| ? | Module ? | READY |
Half-module 7 | Hybrid 10t | Sensor 140 | 3/18/12(TKN) | 3/18/12(TKN) | 3/19/12(TKN/VF) | 3/21/12(FM) | 3/22/12(FM)
| 3/23/12 test 1
3/23/12 test 2
3/23/12 test 3
3/23/12 test 4
3/23/12 test 5
3/23/12 test 6
3/23/12 test 7
3/23/12 test 8
3/23/12 test 9
3/27/12 test 10
3/27/12 test 11 | OK
| 3/27/12(OM)
| ? | Module ? | READY
|
Half-module 8 | Hybrid 11t | Sensor 141 | 3/18/12(TKN) | 3/18/12(TKN) | 3/19/12(TKN/VF) | 3/21/12(FM) | 3/21/12(FM)
| 3/23/12 test 1
3/26/12 test 2
3/26/12 test 3 | OK
| 3/27/12(OM)
| ? | Module ? | READY
|
Half-module 9 | Hybrid 4t | Sensor 142 | 3/20/12(TKN) | 3/20/12(TKN) | 3/21/12(DG) | 3/23/12(FM)
| 3/23/12(FM)
| 3/26/12 test 1 | Channel 466 has no response (as on hybrid), else OK.
| 3/27/12(OM)
| ? | Module ? | READY
|
Half-module 10 | Hybrid 13t | Sensor 145 | 3/20/12(TKN) | 3/20/12(TKN) | 3/21/12(DG) | 3/23/12(FM) | 3/23/12(FM)
| 3/26/12 test 1
3/27/12 test 2
3/27/12 test 3
3/27/12 test 4
3/28/12 test 5
3/28/12 test 6 | Channels 81 and 83 shorted? Else OK.
All channels are OK from test 3 on. | 3/27/12(PH)
| ? | Module ? | READY |
Half-module 11 | Hybrid 14t | Sensor 146 | 3/20/12(TKN) | 3/20/12(TKN) | 3/21/12(DG) | 3/23/12(FM) | 3/23/12(FM)
| 3/26/12 test 1
3/27/12 test 2
3/27/12 test 3
3/28/12 test 4
3/28/12 test 5
3/28/12 test 6
3/28/12 test 7
3/28/12 test 8
3/28/12 test 9
3/28/12 test 10
3/28/12 test 11 | Shorts between channels 262 and 264 as well as between channels 403 and 405; channel 183 dead and high noise on channel 184; else OK.
262-264 and 403-405 appear to have been fixed as of test 3. | 3/27/12(PH)
| ? | Module ? | READY
|
Half-module 12 | Hybrid 6t | Sensor 147 | 3/22/12(TKN) | 3/22/12(TKN)
| 3/23/12(PH) | 03/27/12(FM)
| 03/27/12(FM)
| 03/27/12(OM)test 1 test 2
3/29/12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
3/30/12 28 29 30 31 | Channel 345 dead (as on hybrid), else OK: test 31 | 3/31/12(OM)
| ? | Module ? | READY
|
Half-module 13 | Hybrid 15t | Sensor 153 | 3/22/12(TKN) | 3/22/12(TKN) | 3/23/12(PH) | 03/28/12(FM)
| 03/28/12(FM) | 03/29/12(OM)test 1
3/30/12 test 2
3/30/12 test 3
3/30/12 test 4
3/30/12 test 5 | OK
| 3/31/12(OM) | ? | Module ? | READY
|
Half-module 14 | Hybrid 16t | Sensor 155 | 3/22/12(TKN) | 3/22/12(TKN) | 3/23/12(PH) | 03/28/12(FM) | 03/28/12(FM) | 3/29/12 (OM) test 1
3/30/12 test 2
3/30/12 test 3
3/30/12 test 4
3/30/12 test 5
3/30/12 test 6
3/30/12 test 7
3/30/12 test 8
04/01/12 (VF) test 9
4/1/12 test 10
4/1/12 test 11 | Pedestal shift on channel 147? Else OK.
Chan. 147 has long tails in the response. Others OK.
| ? | ? | Module ? | PROCESSING
|
Half-module 15 | Hybrid 17t | Sensor 156 | 3/23/12(TKN) | 3/23/12(TKN) | 3/26/12(AG,VF,JN)
| 03/29/12(FM)
| 03/29/12(FM) | 03/29/12(OM)test 1
3/30/12test 2
3/30/12test 3
3/31/12test 4 | APV0 and APV2 display a large spread in the noise, else OK
Noise looks normal on test 4 | 3/31/12(OM) | ? | Module ?
| READY
|
Half-module 16 | Hybrid 18t | Sensor 157 | 3/23/12(TKN) | 3/23/12(TKN) | 3/26/12(AG,VF,JN) | 03/29/12(FM) | 03/29/12(FM) | 03/29/12(OM) test 1
3/30/12test 2
3/31/12(VF)3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 | OK | ? | ? | Module ?
| PROCESSING |
Half-module 17 | Hybrid 19t | Sensor 159 | 3/23/12(TKN) | 3/23/12(TKN) | 3/26/12(AG,VF,JN) | 03/29/12(FM) | 03/29/12(FM) | 3/30/12(OM) test 1
3/31/12test 2
3/31/12test 3
3/31/12test 4
3/31/12test 5
3/31/12test 6
3/31/12test 7 | Channel 254 bad (as on hybrid), else OK. | 3/31/12(OM) | ? | Module ?
| PROCESSING |
Half-module 18 | Hybrid 20t | Sensor 563 | 3/26/12(TKN) | 3/26/12(TKN) | 03/27/12(PH)
| 03/30/12(FM) | 03/30/12(FM) | 04/01/12 (VF) test 1
test 2
test 3 | Channel 220 unbonded in test 1 only; all now OK
| ? | ? | Module ?
| PROCESSING |
Half-module 19 | Hybrid 21t | Sensor 564 | 3/26/12(TKN) | 3/26/12(TKN) | 03/27/12(PH) | 03/30/12(FM) | 03/30/12(FM) | 04/01/12 (VF) test 1
test 2
test 3 | OK
| ? | ? | Module ?
| PROCESSING |
Half-module 20 | Hybrid 24t | Sensor 565 | 3/26/12(TKN) | 3/26/12(TKN) | 03/27/12(PH) | 03/30/12(FM) | 03/30/12(FM) | 04/01/12 (VF) test 1
test 2
test 3
test 4
test 5 | Chan 135 and entire APV0 have long baseline distribution tails. Everything else is OK.
| ? | ? | Module ?
| PROCESSING |
Half-module 21 | Hybrid 5t | Sensor 144 | 3/27/12(TKN) | 3/27/12(TKN) | 03/27/12(PH) | 03/30/12(FM) | 03/30/12(FM) | 04/01/12 (VF) test 1
test 2
test 3
| For 1st 3 tests, had 4 bad channels:
402 (new),
417 (was on bare hybrid),
431 and 432 (known sensor pinholes). Others are OK.
| ? | ? | Module ?
| PROCESSING |
Half-module 22 | Hybrid 22t | Sensor 566 | 3/27/12(TKN) | 3/27/12(TKN) | 03/30/12(AG,VF) | 04/01/12(FM) | ? | ? test 1
| ? | ? | ? | Module ?
| PROCESSING |
Half-module 23 | Hybrid 23t | Sensor 567 | 3/27/12(TKN) | 3/27/12(TKN) | 03/30/12(AG,VF) | 04/01/12(FM) | ? | ? test 1
| ? | ? | ? | Module ?
| PROCESSING |
Half-module 24 | Hybrid 25t | Sensor 597 | 3/30/12 (TKN) | 3/30/12 (TKN) | ? | ? | ? | ? test 1
| ? | ? | ? | Module ?
| PROCESSING |
Half-module 25 | Hybrid 26t | Sensor 601 | 3/30/12 (TKN) | 3/30/12 (TKN) | ? | ? | ? | ? test 1
| ? | ? | ? | Module ?
| PROCESSING |
Half-module 26 | Hybrid 27t | Sensor 603 | 3/30/12 (TKN) | 3/30/12 (TKN) | ? | ? | ? | ? test 1
| ? | ? | ? | Module ?
| PROCESSING |
Half-module 27 | Hybrid 30t | Sensor 603 | 4/1/12(TKN) | 4/1/12(TKN) | ? | ? | ? | ? test 1 | ? | ? | ? | Module ? | PROCESSING |
Half-module 28 | Hybrid 28t | Sensor 1801 | 4/1/12(TKN) | 4/1/12(TKN) | ? | ? | ? | ? test 1 | ? | ? | ? | Module ? | PROCESSING |
Half-module 29 | Hybrid 29t | Sensor 1802 | 4/1/12(TKN) | 4/1/12(TKN) | ? | ? | ? | ? test 1 | ? | ? | ? | Module ? | PROCESSING |
/EPP