2020-08-17 Detector Planning Meeting notes

Shift coverage this week.

• M, T, W: P173 @CXI (oncall)
• Th: X420 @CXI (JF?), X421@XPP (ePix100) (oncall?) X396@XCS (TVD, ePix10k2M check constants)
  
  
• Other:
• Wave8 status?
• ePix10k Constants status/plan?
• Rayonix on track for need dadte?

• Baseline JF and 2M 'traveller' pages on Confluence.
  • Collect and analyze any remaining in-lab test data.
    • Solid pedestals
    • Noise map
    • Response uniformity (mini-X)
    • Bootstrap gain (sealed source)
    • Linearity (signal injection)
    • Document results in 'traveller' on confluence
  • Next detector deployed: Kayla to lead meeting for mapping detectors to experiments.

• Group priorities review:
  • Detectors for Run 18
    • Jungfrau commissioning plan and commissioning tests.
    • ePix10k2M (new) Commissioning test plan, calibration along same lines as JF.
    • ePix10k2M (old) Needs shroud re-replaced, plans for backplate replacement.
    • ePix smalls tests to match.
    • Detailed calibration on ePix/Jungfrau smalls
      
      
  • Detectors under development
    • RIXS-CCD, review draft Project Plan w/NEH 2.2
    • RIXS-CCD Concept Design (R to set meeting to talk cooling options)
    • Anton project at UCB/SSL (milestone/schedule revision received)
    • SXR Downselect prep
      
      
  • Lab 'commissioning'
    • DAQ
      
      • Storage nodes
      • LCLS I/II compatibility
    • Table seismic
    • Laser table re-cert
    • BIO for racks in chase
    • DP node purchase
    • Sealed source purchase (M&S evaporating)

Actions:

Other news:

KZ: Epix 100 now working in XPP...what is distance between kapton and sensor surface?

CH: USB patch cord available??

• Mask measurements last week.
• Project management training.
• Charge injection scripts on 10k smalls for mask tests.

RA: Beam pipes for 2M? In work.

• Loan stages to CXI....ensure return.
• Meet re cooling concepts...met with Jim re outside space: not much.

KP: JSA summary list circulated

• Small Rayonix to be tested in XPP...manual available??
• XPP/MFX/XCS fibers due this week, other wise need ugly solution.
• Small Rayonix testing can be done by others.
• XPP/XCS power cable pinout (controls needs to tell us MPOD working)

PH:

• Learning NERSC interface

• M&S Status (Through July)

• Labor snapshot (June actuals):
  
  
  

Coordinate/update lab schedule.