#!/bin/bash # Start the XCS Pulse Selector Python GUI cd /reg/neh/home1/jsludvik/svn/trunk/ioc/xcs/xip_pp/current/pyscripts/src python main.py --instr xcs
~/.pp_xcs/pvlist.lst
# --------------------------------------------------------------- # Pulse Selector Description File # --------------------------------------------------------------- # Syntax: # <TYPE>, <PVNAME|IOCNAME|SCRIPT>, <DESC> # some_more_comments # Where: # <Type> : "SEQ" -> Sequencer # "EVR" -> EVR associated to sequencer # "PPM" -> Pulse Selector # "SVR" -> Motor and Pulse Selector Server # "IOC" -> Motor and Pulse Selector software IOC # "SPP" -> EDM screens for motion # "SEV" -> EDM screens for evr # <PVNAME> : PV base name # <IOCNAME> : Server name associated to Pulse Selector PVs # <DESC> : User description # Notes: # PVNAME or IOCNAME are not case sensitive. # Line can be commented out by starting with '#' character. # --------------------------------------------------------------- SEQ, XPP:R35:IOC:SEQ, XPP DAQ Sequencer # FIXME PLY, IOC:IN20:EV01, XPP DAQ Sequencer play mode # FIXME EVR, XCS:R42:EVR:01, VME EVR located in XCS Rack 42 # OK PPM, XCS:SB2:MMS:09, Pulse Selector Motor # TOCHECK IOC, ioc-xcs-trigger-ims, IOC running pulse selector # OK SVR, ioc-tst-cam5, server running IOC for pulse selector # FIXME SPP, ppm_gui.sh, EDM screen startup shell script for PP motor # FIXME SEV, evr_gui.sh, EDM screen startup shell script for EVR # FIXME
XIP main GUI:
/reg/neh/home1/jsludvik/svn/trunk/ioc/xpp/xip_pp/current/motionScreens/xip_gui.sh
XCS Motor GUIs:
/reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XCS:SB2:MMS:09 /reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XCS:SB2:MMS:08 /reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XCS:SB2:MMS:21
Startup.cmd:(Working in progress)
/reg/d/iocCommon/sioc/ioc-xcs-trigger-ims/startup.cmd
ssh TODO
ssh ioc-tst-cam5 /reg/neh/home1/paiser/bin/evr.sh EVR=TST:CAM:05:EVR
ssh ioc-tst-cam5
sudo /reg/d/iocCommon/sioc/ioc-tst-cam5/startup.cmd
[paiser@ioc-xrt-xcscam04 ~ 12:18:20] psproc PID USER-ID SIOC COMMAND HOSTNAME PORT 4851 tstioc caRepeater procServ ioc-xrt-xcscam04 30000 5147 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 30001 5150 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 40000
ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power status ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power reset
Where: <you_should_know> is the standard ipmi password that you_should_know...
Python homing script:
/reg/neh/home1/jsludvik/test-python/xip-home.py
XIP main GUI:
/reg/neh/home1/jsludvik/svn/trunk/ioc/xpp/xip_pp/current/motionScreens/xip_gui.sh
XPP motor GUIs:
/reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XPP:TST:MMS:01 /reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XPP:TST:MMS:02 /reg/g/pcds/package/epics/3.14/modules/pcds_motion/R2.3.4/launch-motor.sh XPP:TST:MMS:03
Startup.cmd:
/reg/d/iocCommon/sioc/ioc-xpp-trigger-ims/startup.cmd
Mode 1: Single pulse
Mode 2: Continuous trigger
Mode 1 and 2 should be the same program, as the Seq will generate the pulses to the motor, and open/close operation shouldn't make any difference whether it is 1 or more. The motor sees a trigger and moves.
This mode is accessed by <PV>:RUN_MODE2
Mode 3: The motor opens on a pulse, counts N pulses and closes on the Nth pulse. The pre-trigger and close trigger should be factored in by the upper layer software to determine the proper N value to put into the motor. All the motor does is, open on N=1, count, then close on N=N.
This mode is accessed by <PV>:RUN_MODE3
Mode 1 was programmed like just mode 2 with a User "Trigger" enable/disable, which may or may not be useful for us. Sort of like 2 layers of enabling, versus just 1 for mode2
This mode is accessed by <PV>:RUN_MODE1
Reset Modes to start new mode:
<PV>:RESET
1) EPICS Motor Record: HOMF
2) Zero Position
3) Move Relative -76.25 degrees
4) Zero Position
Pulse Selector Test/Checkout Procedure (6/10/2013)
X motor calibration
Y motor calibration
New Interlock:
Add Y motor interlock, position >= 2 mm above 0 position, no X movement allowed
X-Y interlock stopped working today, need to investigate.