Calibration and characterization meeting (TID/LCLS Ops) - 9/26/2024

Attendance:

Presentation:

Agenda/Notes:

1.  ePixM:
   1. Beamtime prep, Status:
      
      1. Install the ePixM at MFX beam dump
         • Scheduled Time: Thursday, September 26, 12 pm - 2 pm.
         • Setup check list: Fiber converter (with FTP fiber and 3 tranceivers), Power supply, Keithley Source meter (TID IC lab), power cable
         • Before the deployment, check the fit of the masks with the detector unit shell.
         • Check the MFX hutch Humidity/Temp sensor to calulate the Dew point.
      2. Move the setup to the beamtime table
         1. Next Monday 11am
         2. Physical setup to secure the camera; (Chris Koerber)
         3. 
      3. Test the script for the beamtime data collection;
         • Git branch update?
      4. Setting up the pre-setup meeting (include TID people);
      5. LCLS Daq for beamtime
         1. New register setting optimized for dynamic range
      6. Get the measurement plan (Zongde)
         • Drafted  https://confluence.slac.stanford.edu/x/MQwtHw
         • Measurement Flow Chart (low temperature/humidity/dew point to prevent condensation)
         • 
      7. Schedule the staffing;
         • Two-person hutch searching  required 
         • 
         • Philip will be online for the first shift and on call for the second shift.