Bugs and Robustness
| Issue | Person | Priority | Status |
|---|---|---|---|
| Check that the beam rate is not equal zero if rate set to "BEAM" | Spencer | Medium | |
| Fix "Use_PV" functionality. | Sharon | Medium | DONE |
| Fix camera triggers if DAQ fails. | Sharon | High | DONE |
| "Fix cameras" button disabled if DAQ hasnt run yet | Sharon | Medium | DONE |
| "Fix cameras" button should use default values? - yes | Sharon | Medium | DONE |
| Timestamping fails on certain ROI settings? | Spencer | High | DONE |
| Upgrade all machines in S20 to 10G connection | Spencer | Medium | half done |
| Install 10G switch and NAS in S10 | Medium | ||
| Check what happens if new DAQ is started before old one is finished (failed abort) | High | ||
| Camera binning messes up pulse ID finding | Spencer | Medium | DONE |
| Fix binning and ROI for CMOS cameras | |||
| Why aren't the CMOS servers saving data faster? | |||
| Can't get magnet values on first DAQ? | Low |
Feature requests
| Issue | Person | Priority | Status |
|---|---|---|---|
| Find a way to globally trigger a modifier bit (e.g. "DUMP_2_9"). | David | ||
| Scan function that pauses until you click 'ok' | |||
| Generate "camera config" file including trigger info and add a save/restore button. Monitor if this finished ok or not. | Sharon | ||
| Load/Save Config files. Default config files. | Claire | ||
| Robustness issues. . . | Spencer | High | In progress |
| DAN features | |||
| Documentation/commenting | Spencer | High | In progress |
| Fix "Use_PV" functionality. | Sharon | Medium | DONE |
Documentation
For now, the main references on the DAQ are these attached PDFs from IBIC 2021.
GUI Interface
Main screen → Profile Monitor → LI20 → FACET DAQ (green button)
Wait for a bit after pressing the FACET DAQ button.
