You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Bugs and Robustness

IssuePersonPriorityStatus
Check that the beam rate is not equal zero if rate set to "BEAM"SpencerMedium
Fix "Use_PV" functionality.SharonMediumDONE
Fix camera triggers if DAQ fails.SharonHighDONE
"Fix cameras" button disabled if DAQ hasnt run yetSharonMediumDONE
"Fix cameras" button should use default values? - yesSharonMediumDONE
Timestamping fails on certain ROI settings?SpencerHighDONE
Upgrade all machines in S20 to 10G connectionSpencerMediumhalf done
Install 10G switch and NAS in S10
Medium
Check what happens if new DAQ is started before old one is finished (failed abort)
High
Camera binning messes up pulse ID findingSpencerMediumDONE
Fix binning and ROI for CMOS cameras


Why aren't the CMOS servers saving data faster?


Can't get magnet values on first DAQ?
Low

Feature requests

IssuePersonPriorityStatus
Find a way to globally trigger a modifier bit (e.g. "DUMP_2_9").David

Scan function that pauses until you click 'ok'


Generate "camera config" file including trigger info and add a save/restore button. Monitor if this finished ok or not.Sharon

Load/Save Config files. Default config files.Claire

Robustness issues. . .SpencerHighIn progress
DAN features


Documentation/commentingSpencerHighIn progress
Fix "Use_PV" functionality.SharonMediumDONE


Documentation

For now, the main references on the DAQ are these attached PDFs from IBIC 2021.


GUI Interface


Main screen → Profile Monitor → LI20 → FACET DAQ (green button)

Wait for a bit after pressing the FACET DAQ button.


  • No labels