The cable goes from the detector box to the power supply and external monitoring instruments. It must feature a DBM25P032N on one side and BNC / bananas on the other side.
DBM25S032N Pins OUT - Male to Female
DBM25P032N | Signal name | HD 25 pins female |
1 | MPS | BNC |
2 | DGND | Banana |
3 | TG | BNC |
4 | DGND | |
5 | DAQ | BNC |
6 | DGND | |
7 | RUN | BNC |
8 | DGND | |
9 | TTL_OUT | BNC |
10 | DGND | |
11 | TTL_IN | BNC |
12 | DGND | |
13 | THERM_IN | Banana |
14 | DGND | |
15 | THERM_OUT | Banana |
16 | DGND | |
17 | AGND | Banana |
18 | AGND | |
19 | ANA_24V | Banana |
20 | ANA_24V | |
21 | DIG_24V | Banana |
22 | DIG_24V | |
23 | DGND | |
24 | HV_GND | Banana |
25 | HV_BIAS | Banana |
On the DBM25P032N side, the following pins must be connected together: |
· Pins 2,4,6,8,10,12,14,16,23 |
· Pins 17 and 18 |
· Pins 19 and 20 |
· Pins 21 and 22 |
Cable length: 5.5ft |
Twit cables used for: |
· DGND and DIG_24V |
· AGND and ANA_24V |
· HV_GND and HV_BIAS |
DBM25S032N Connector
Final product