Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Log into 'clonioc1' (requires access through gateway).
ssh hallgw ssh clonioc4
Start GUIs
cd /usr/clas12/hps/dev/ source .setup-hps cd utils ./start_svt_guis.sh
Once the GUI's are up, the FEB's should be powered first, followed by the flange cards.
Log into 'clonioc1' (requires access through gateway).
ssh hallgw ssh clonioc4
Control IOCs (if not running!):
cd /usr/clas12/hps/dev/ source .setup-hps cd utils ./control_svt_dpm.py -a status|start|stop [-t for testing] # you can also give args for specific nodes: [dpmX|dtmY|cntrldpm] # if no args given, all are affected. # to monitor the stdout in xterms ./start_svt_mon.py
NOT USED FOR THE MOMENT
Access IOC from clonioc1:
telnet localhost 20006 # iochvCaen telnet localhost 20007 # iocsvtDaq
Control IOC from clonioc1:
Ctrl+] to exit #(type quit in terminal) Ctrl+x to reboot
ProcServer commands
The path has to be included to override the production default. So it's a bit cumbersome, but you can put the lines in a local script.
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq stop procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq start procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq status # show all iocs procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status
Development tree on clonioc1:
cd /usr/clas12/hps/dev # contains: # apps/hvCaenApp, apps/iocBoot/iochvCaen # apps/svtDaqApp, apps/iocBoot/iocsvtDaq # drivers/LVMPOD