• Created by Unknown User (phansson), last modified on Mar 03, 2015

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

SVT Monitoring

Log into 'clonioc1' (requires access through gateway).

ssh hallgw
ssh clonioc4

Start GUIs

cd /usr/clas12/hps/dev/
source .setup-hps
cd utils
./start_svt_guis.sh

Once the GUI's are up, the FEB's should be powered first, followed by the flange cards.

SVT Hybrid and DAQ IOC Control 

Log into 'clonioc1' (requires access through gateway).

ssh hallgw
ssh clonioc4

 

Control  IOCs (if not running!):

cd /usr/clas12/hps/dev/
source .setup-hps
cd utils
./control_svt_dpm.py -a status|start|stop [-t for testing] 
# you can also give args for specific nodes: [dpmX|dtmY|cntrldpm] 
# if no args given, all are affected.

# to monitor the stdout in xterms
./start_svt_mon.py

Official IOC instructions

NOT USED FOR THE MOMENT

Access IOC from clonioc1:

telnet localhost 20006  # iochvCaen
telnet localhost 20007  # iocsvtDaq

Control IOC from clonioc1:

Ctrl+] to exit #(type quit in terminal)
Ctrl+x to reboot

ProcServer commands
 The path has to be included to override the production default.  So it's a bit cumbersome, but you can put the lines in a local script.

procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq stop
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq start
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot -i iocsvtDaq status
# show all iocs
procServMgr -p /usr/clas12/hps/dev/apps/iocBoot status

 

 

Development tree on clonioc1:  

cd /usr/clas12/hps/dev
# contains:
#   apps/hvCaenApp, apps/iocBoot/iochvCaen
#   apps/svtDaqApp, apps/iocBoot/iocsvtDaq
#   drivers/LVMPOD
  • No labels