Installed at MEC

Connected to PR60 Patch Panel 

Upper Row:

• MEC:USR:MMS:17
  • PLS-85
  • Routed to NW side of TC
  • Flange D2c, FF D5 Control, FF D3 Encoders
• MEC:TC1:MMS:26
  • USR:22
  • CA-261-802-16 C01
  • Routed over NW side of TC to T5(beta)/4.
• MEC:TC1:MMS:22
  • CA-261-802-16 C01
  • Routed over NW side of TC to T5(beta)/5
• MEC:USR:MMS:20
  • CA-201-804-95
  • Vacuum Iris
  • Routed over NW side of TC to T5beta)/#1
• MEC:USR:MMS:21
  • Routed clockwise around bottom of TC to B5/B5
  • Displayed as "MXI Z"
• MEC:USR:MMS:22
  • CA-261-805-43-C00
  • Routed over top of TC to T5(beta)/#3.
• MEC:USR:MMS:23
  • TC1-MMS-23
  • VT50 Tag
  • Routed over top of TC to T5(beta)/6
• MEC:USR:MMS:24
  • Not in use.

Lower Row:

• MEC:USR:MMS:25
• • CA-261-804-70-C00
  • Routed over top of TC to T5(beta)/#2
• MEC:TC1:MMS:25
  • CA-261-806-28
  • Micos MP-20B 2SM HLS 10E-6 Cable
  • Routed to NW side of TC
  • Flange D2c, FF D8
• MEC:USR:CLZ:01
  • Routed CW under TC to Optique Peter Vertical Stage
• MEC:USR:CLF:01
  • Routed CW under TC to Optique Peter Focus Stage
  • Note: On loan to CXI
• No connector
• No connector
• MEC:TC1:MMS:29
  • CA-261-806-28
  • Micos MP-20B 2SM HLS 10E-6 Cable
  • Routed to NW side of TC
  • Flange D2c, FF D6
• MEC:TC1:MMS:23
  • CA-261-805-23-C00
  • Micos PLS-85 TT19P to HDB15S
  • Routed over top of TC to Talbot Y stage

Connected to Target Chamber Only

• TT19P -  DB15-MForce (white cable)
  • Routed from NW side of TC over top to T5(beta)/3
  • RS40 Rotation Stage
• TT19P - CA-261-805-31 (grey cable, DB15)
  • Routed from NW side of TC over top to T5(beta)/#4
  • RS40 Rotation Stage

To Remove

• CA-261-802-16 C01
  • Routed along bottom W side of TC to the South to near B7
  • Not connected in PR60 patch panel
  • One thick, three thin cables, grey.
  • Connected at SW side of TC to CA-376-423-39-C00 
    • and then to Motor & Encoder, PPS-110-2x316/Stepper Motor (DB25)
  • Will remove later - cable is tangled under bottom of TC.

Camera Cables

• OPAL8 - Removed
• GIGE3
  • Network and Power cables - not connected
  • TC1 Alignment
  • Goes to...
• Thorlabs Plasma Light Source HPLS200 Series
  • Connected to OPAL01 USB Fiber Pair in PR60
• GIGE5
  • Connected to DAQ TRIG #1
  • Goes to...
• Green BNC Trigger cable - N side roll-up
• Black BNC Trigger cable - to somewhere on TC top
• Thin Black BNC Trigger cable - N side roll-up

Alviums - to-do:

• Polarimetry
  • Remove power, trigger, communications (fiber+USB)
• Facility
  • Cleanup power cabling

Grey Cabinet in Access Tunnel

Shelf 2 (Bottom = 1) - IMS Cables (TT19P)

Ending in multiple connectors (assorted)

DB15 + HDB15S

• VT50 Cable 2, CA-261-802-16-C01

VGA-DB15 + DB9

• Beam Block, CA-261-803-52 C02

DB15 + DB9

• CA-261-805-43

2xTT19P to DB9

• Standard Motor DB9 Cable #7/#8, CA-261-803-72

3xTT19P to DB50

• XYZ Stages, CA-261-804-61 
• Timing Tool XYZ, CA-261-804-50-C00

Ending in TT8P or TT19P

• Pfeiffer Stage
• Pfeiffer Stage Manipulator
• MP-20A, XCS-USR-MMS-18, 261-801-81-C01
• MEC:TC1:MMS:25 / RS40 Rotation Stage, LN03122
• CA-261-801-81-C01, LN03118

Shelf 3 - IMS Cables (TT19P)

Ending in DB9

• Filter Wheel Cable, MEC-TC1-MMS-01, CA-261-803-71-C00
• Filter Wheel Cable, MEC-TC1-MMS-02, CA-261-803-71-C00
• Filter Wheel Cable, MEC-TC1-MMS-02, CA-261-803-71-C00
• Micos Beam Block, CA-261-804-72-C00
• FS Waveplate Motor Power Cable, CA-261-805-33-C0
• FS Waveplate Motor Power Cable, CA-261-805-33-C0
• MEC Micos AFW-65 HVAC Motor Cable (filterwheel), CA-261-803-72
• MEC Micos AFW-65 HVAC Stage Cable, Blast Shield, CA-261-804-70
• CA-261-84-95 C00
• Von Hamos
• VT50 incomplete, ending 2xDB9: 6, CA-261-802-16
• Standard Motor DB9 Cables #1/#2
• Standard Motor DB9 Cables #3/#4
• Standard Motor DB9 Cables #5/#6

Ending in DB15

• VT50 Complete: TC1:MMS:22, V-AXIS, CA-261-802-16 + Mercury 3000

Ending in HDB15S

• Talbot, PLS85, 1, CA-261-805-23

• USR:MMS:20, PLS85, 2, CA-261-805-23

• Navitar Lens Control Cable, Navitar Focus

• CA-261-805-62 C03

• CA-261-805-80 C00

• PLS85, CA-261-805-23

• Navitar Lens Control Cable, Navitar Zoom, CA-261-801-62-C03

• CA-261-801-62 C03

New cable labeling starting 22 Aug 2024